Crawl gears for TRX4m
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original Traxxas Part is hard to get, so I recreated them on my own...
- Ocena
- 0 / 5
- Polubienia
- 66
- Pobrania
- 454
- Wydruki
- 0
- Wyświetlenia
- 2519
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Because of the availability issues of the original Traxxas part TRX9776R i've decided to recreate those exact gears to print on my resin printer.
Print everything with supports to avoid the elephants foot, and orient all gears as shown in your slicer.
It is possible that the gears wear in a bit and that the resin is not suitable for this kind of use. In my TRX4m the gears run very smooth and have held up so far. I would suggest to print two or more sets at once and have the spares in your backpack when you go out.
I'll run these gears until the original Traxxas part is available to me.
Print Settings
Printer:
Elegoo Mars 2 Pro
Supports:
Yes
Resolution:
0,025
Infill:
100%
Filament: Sirayatech blu clear v2 resin
Category: R/C Vehicles