209 modeli
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
These are replacement left and right trim pieces for the driver side dashboard of some 90's OBS Ford Trucks. I modeled these using the OEM dash panel out of my Bronco so I can't vouch for fitment in aftermarket panels, however I'd imagine…
These are some better-looking rims for the Lego Technic Ford Bronco (set #42213). They are based on the OEM wheels shown on the product box. There are two versions, one with the axle covered and one with the axle open.
Axial Early Bronco 1/10 Fuel Cap Print 0.4mm or 0.2mm with supports!
One of the guys in my house is a big Broncos fan, so I made this for his closet doors.
I used ASA with 30% infill. Use whatever you prefer due to minimal structural integrity for the block. I created this to fill the opening that Ford seemed to have missed. Updated the file to come a bit closer to flush with the plastic.…
This is a model of a Ford Bronco from the 1970s. It fits a Auto World Xtraction style chassis. I printed this body on my elegoo mars 5 ultra resin printer. I included the fusion 360 file so you can modify it if you want to.
Hangar9 20cc Bronco Ejection seat, with a bit more detail than the plastic lawn chairs included with the kit. there are a number of pieces and you will have to assemble, I used epoxy, the included photo gives and idea of the assembly
Hangar 9 20cc Bronco Turbine Exhaust models! there is a left and right the left is marked
The original HPI Racing mini kahuna monster truck battery (Plazma 7.4v 800mah 2S 35c Lipo) is very small (48.5x24.5x19mm) and the battery compartment is tight around that HPI battery so its impossible to use any other small Lipo in that…
These are some better-looking rims for the Lego Technic Ford Bronco (set #42213). They are based on the OEM wheels shown on the product box. There are two versions, one with the axle covered and one with the axle open.
Uses a M8x50 BHCS. I decided to make a hookless roll bar hook for the Roll Bar of the Bronco. I figured it would be stronger then hooked ones. I also suggest ASA or PETG.
EDC Dump Bin with Gridfinity Base. Size is 4x4 Gridfinity. I split the model into 3 parts so color can be added.
I used Gemini AI to write the openSCAD code using my measurement requirements. While this is my original work, I was inspired by the Quadratec Jeep forms which I paid for two sets and never could get them to cut perfectly. The resulting…
***Orange and black is OEM, Red is printed from the model*** Was asked to create higher visibility vent tabs as the one near the door was hard to see. Must remove the existing vent tabs to put these on. BDUSA has a youtube video showing…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
These are replacement left and right trim pieces for the driver side dashboard of some 90's OBS Ford Trucks. I modeled these using the OEM dash panel out of my Bronco so I can't vouch for fitment in aftermarket panels, however I'd imagine…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Adapter to mount a beauty disk with Bowens mount to a Broncolor Studio Flash (Siros). Printed with PETG, 0,2 mm stuctural. Printing time about 3,5 hours. Unfortunately, the adapter slowly distorted (melted). I strongly recommend using a…
I needed a new striker sleeve on my 1991 Ford Bronco. Should be the same for 80-96 maybe 78 on up but I am not familiar with the 2nd gens. PETG probably the best option. I printed with a brim just to be sure it stuck.
Replacement grommet for the linkage on the external spare tire carrier latch on a Full sized Ford Bronco (80 - 96) PETG is the best option I feel.
The original handle for the Ford Bronco 2022 was broken by the previous owner. I was asked to design a replacement part. After a few iteration I arrived at this. The part is functional and fits nicely. The part in the pictures is printed…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
Just DstarPanda's model but I put the word Ford on the front where it is on my brother's 74 Bronco
A piece of desk art for the Bronco enthusiast. It is about 7.5 inches (200mm) wide. Scale the X and Y in your slicer if you want a different size. If you don't have multi filament, pause after layer 10 at .2 layer height for filament…
I wanted a high clearance bumper for my TRX-4M Bronco but still wanted it to look like a real one. I made a remix from Jraaadd's high clearance bumper, https://www.thingiverse.com/thing:5960218 and Anthem17 TRX4M Bumper with ram bar…
Axial Early Bronco 1/10 Fuel Cap Print 0.4mm or 0.2mm with supports!
Stylized mini vehicle based off of the new Ford Bronco. All snap fit pieces that can be printed with no supports.
I plan to use these for #buckbuckbronco, but the first one is going on my key chain. No supports needed. Printed in Silk PLA, but use whatever you like, no supports or raft required. I made this using Fusion360 and printed it on my…
Here is a great gift or personal treat: Denver Broncos Car Rearview Mirror Ornament Hanger! Had fun designing this and planning to make all NFL teams! Feel free to add a picture if you print! The elastic string I used for this print is…
I printed in ASA, the bracket does sit pretty close to the muffler so there may be some heat. Bracket is held in place with a plug that snaps into the bumper. Links to components: Trailer light plug adapter Hitch If you like the model you…
Good luck to everyone and good printing
Recommend PETG or other outdoor friendly filament. Simple insert to cover trailer hitch opening. I used UV cured resin to fill in the emboss for a glossy finish in the image. Prints with or without supports, place face down on textured…
Do you need to fix that crunchy blown speaker sound coming out of your Bronco dash tearing your eardrums to bits? I have your super simple fix! If you have a newer Ford Bronco you know just how awful the factory speakers are. Like most…
This part will have a very limited use case audience but if you have a 6th gen Ford Bronco with a set of Gearshade limb risers and a Zroadz roof rack or a Ø1.5" tube rack this might be right up your alley. The quick removability of the…
I made this little wedge to lock my air vent from flopping around when there is a cell phone holder and phone hanging on it. Category: Automotive
Just a little mounting plate to relocate your Ford Bronco Badlands fender badge to the front grill so you can add that classic looking script fender badge in it's place. This fits perfectly on my sasquatch with no drilling or cutting. I…
this model is easy to print made it in Onshape so should have no problems printing.
One of the guys in my house is a big Broncos fan, so I made this for his closet doors.
Hitch cover for the 2021 Bronco Sport with a 3d logo loosely based on the actual one.
A simple, rounded rectangle key fob for the Ford Bronco line. Features text and logo extruded fully through fob as negative space. The keychain in the STEP file design is fairly large, and can be sized down or up as desired (pictured is…
Denver Broncos Retro Oversized Necklace Logo that I designed. I hope you enjoy!
Denver Broncos Oversized Necklace Logo that I designed. I hope you enjoy!
Hitch cover with ford bronco and the words Bronco under it. Best results if printed in two colors designed easy to do without a MMU or AMS and if you have one even better! can use any material but PLA may not last long in the sun and…
Place your ford bronco logo on the wall in your house or give it as a gift.
These are recovery boards for the TRX4m Bronco. They are 1/18 scale and very detailed. Thanks to the original creator for the board design. I've tailored them to the Bronco better by changing the logo from a Defender logo. Otherwise, they…
When I bought my TRX4m Bronco, I wanted to make it look more aggressive. I added the fender flares from a Defender body, but this wasn't enough. I have been heavily inspired by the real-world Bronco Raptors. One of the main front-end…
This is a jerrycan holder I made for the TRX4m Bronco. It can hold either the stock jerrycans from the Defender or my design, which can be found here: https://www.thingiverse.com/thing:6871004 It utilizes the stock hardware, and fits…
coaster designed to fit in the base of your cupholder for visual appeal. one has "Bronco" logo in center, the other has bucking bronco emblem.
bronco lightbox, front and back halves. install strip leds into box, then either glue or friction fit face to base. can hang on wall or place on shelf or desk.
Lámpara de pared con el logo de Denver Broncos Diseñada para imprimirse en una área de 250 x 250 solo pido que no regalen o vendan los STL y si promocionan la impresión de mis diseños me pongan de que soy el diseñador y asi yo los pueda…
Hi there! Let me introduce you to the Ford Bronco 1970 , a carefully crafted 3D model designed for those who appreciate detail and quality in their projects. Perfect for uses such as visualization, 3D printing, animation, or simply as…
This is a dummy key fob for a 2021 Bronco. I made this to go along with an external ESC power switch mod I found on Printables and installed on my Traxxas TRX4 Bronco RC crawler. There are 3 variations consisting of a slide-out, flip-out…
Easy to print might need a little filling
The Rockwell OV-10D Bronco is the 2nd generation of the airframe, which incorporated extensive modifications including a turreted infrared night-vision camera system, larger engines and props, and side-mounted chaff launchers. It is…
This is inspired some cupholder inserts I saw online. I didn't like their design, and I didn't to copy them, so I came up with my own design. It measures 2.75 inches in diameter and should fit the cupholder of the Ford Bronco. I designed…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Brisbane Broncos light. add your pictures would love to see different ways this is created
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Better in TPU or similar. Glued or screwed in. There's a plain and a Bronco emblem version (using https://www.thingiver
Printed out of ASA with 35% infill. Supports required. Fits this midland low profile cable.…
I used ASA with 30% infill. Use whatever you prefer due to minimal structural integrity for the block. I created this to fill the opening that Ford seemed to have missed. Updated the file to come a bit closer to flush with the plastic.…
Insert for mag safe charger. Can be used with factory rubber over the top but may create additional heat for your iphone. For best results remove the rubber and place iphone directly on mag safe mount. Ugreen CD245 is what I used and fits…
Thanks for checking out my Bronco Key Hook! I made this hook to complement the more rugged and outdoorsy vibe of the Ford Bronco lineup and to hold the keys to my own Bronco Sport. It features: 60x30mmx15mm size Geometric design with no…
Used TPU/Flex at 20% infill. Ended up orienting model standing up on the build plate with supports on the oval plug.
Simple plug for the Ford Bronco Crash Bars. There are 2 of them on each side. Front one by the bumper and another at the end of the wheel well by the front door. I also added Front Front Crash Bar Plug has a bronco logo on it. If you want…
This is a model of a Ford Bronco from the 1970s. It fits a Auto World Xtraction style chassis. I printed this body on my elegoo mars 5 ultra resin printer. I included the fusion 360 file so you can modify it if you want to.
Hangar9 20cc Bronco Ejection seat, with a bit more detail than the plastic lawn chairs included with the kit. there are a number of pieces and you will have to assemble, I used epoxy, the included photo gives and idea of the assembly
Hangar 9 20cc Bronco Turbine Exhaust models! there is a left and right the left is marked
Electronic gear and door handles for rear cockpit of hangar9 0v-10 Bronco model
This is a model of my wife's Ford Bronco Sport designed for the Crash Derby board game. I have printed and tested this on the Crash Derby Pickup chassis. I printed it at 0.1mm without supports.
Should fit 1992-1996 Ford Bronco & F150 and 1992-1997 Ford F250 and F350. Pretty sure these are not available, and if they are broken or missing, your ash tray falls out of the dash. Modeled in solidworks based on measurements from…
This piece highlights the Denver Broncos emblem centered within a clean circular badge, using vivid orange, deep navy, and crisp white for maximum contrast and impact. The strong outlines and balanced composition give it a modern, graphic…
The original HPI Racing mini kahuna monster truck battery (Plazma 7.4v 800mah 2S 35c Lipo) is very small (48.5x24.5x19mm) and the battery compartment is tight around that HPI battery so its impossible to use any other small Lipo in that…
Uses a M8x50 BHCS. I decided to make a hookless roll bar hook for the Roll Bar of the Bronco. I figured it would be stronger then hooked ones. I also suggest ASA or PETG.
EDC Dump Bin with Gridfinity Base. Size is 4x4 Gridfinity. I split the model into 3 parts so color can be added.
I used Gemini AI to write the openSCAD code using my measurement requirements. While this is my original work, I was inspired by the Quadratec Jeep forms which I paid for two sets and never could get them to cut perfectly. The resulting…
My 1978 FORD Gen2 Bronco restoration project was missing a plastic seat lever on the passenger side. My modeling isn't the highest quality, and some measurements may be slightly off. But you can't purchase these even from LMC, and for…
***Orange and black is OEM, Red is printed from the model*** Was asked to create higher visibility vent tabs as the one near the door was hard to see. Must remove the existing vent tabs to put these on. BDUSA has a youtube video showing…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Inkbird inlet size is 30.35mm ID. Outlet is 47.9mm OD and is clearanced for the welded bolt for the air control door. Must remove the air control door to install. Today will be my first used of the inkbird with my smoker. I will update…
Interior for the Traxxas TRX-4M Ford Bronco because it looks better.
Denver Broncos logo that you can print the colors separately. You don't need a MMU. Print the colors separately. I made it so everything is the same height. I you want white and orange to be taller then just scale them thicker. I will…
