Prusa MK3/S/+ Spool Extender [CC0]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple spool extender to put on larger sized spools. (READ DESCRIPTION!)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
A simple yet effective way to put wide spools on your MK3/S/+.
Simply take a spool, slide this adapter in, and slot it onto the spool holder with the wide part facing outwards. Make sure to wiggle/rotate the piece a bit to get it on properly, as it is a tight fit, and then push it all the way on the holder.
Print in PETG for best results and minimal friction.
PLEASE NOTE: Do NOT attempt to put full spools onto the printer using this tool. I cannot garuntee the safety of doing so, as this will apply 3x more force on the spool holder than intended. This is only meant to be able to use spools that are at LEAST 1/3rd empty, 3KG may be too much for the printer frame and/or spool holder to handle. You have been warned!