1 / 4
Deck box for 80 cards with dice slot (MTG, Pokemon, Lorcana, One Piece, Digimon) — zdjęcie 1
1 / 4

Deck box for 80 cards with dice slot (MTG, Pokemon, Lorcana, One Piece, Digimon)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box for magic, pokemon decks or other card games of that size. Compatible with up to 80 cards, ideal for double sleeved.

Ocena
0 / 5
Polubienia
25
Pobrania
145
Wydruki
1
Wyświetlenia
1695
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

This model is designed for card decks from different TCGs, fitting 80 double-sleeved cards. Like the original model, it is compatible with 6x2 mm round magnets to improve closure. An element called 'hitch' has been added; 8 are required, and they allow the box to be closed by pressure. In my case, I placed them in the holes of the bottom_case_75_cards and the upper holes of the mid_case_75_cards piece, as seen in the images. It is important to mention that they have been glued together, and it may be necessary to sand them a little to round off the piece once they are glued.

Example Print:

  • Material: Generic Translucent PLA
  • Layer height: 0.2mm
  • Infill: 15% Gyroid
  • Infill for hitch: 100% rectilinear
  • Print Temp: Hotend - 205C, Bed - 65C (It is recommended to make a temperature tower and adjust to the temperatures that work best for your material.)
  • Fan: 100% after layer 1
  • Supports:
    • Only needed for the mid_case_75_cards piece to support the bottom. If your printer can make bridges that long, it is not necessary but recommended.

Tagi