1 / 4
Deck box for 80 cards with dice slot (MTG, Pokemon, Lorcana, One Piece, Digimon) — image 1
1 / 4

Deck box for 80 cards with dice slot (MTG, Pokemon, Lorcana, One Piece, Digimon)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Box for magic, pokemon decks or other card games of that size. Compatible with up to 80 cards, ideal for double sleeved.

Rating
0 / 5
Likes
25
Downloads
144
Makes
1
Views
1,681
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

This model is designed for card decks from different TCGs, fitting 80 double-sleeved cards. Like the original model, it is compatible with 6x2 mm round magnets to improve closure. An element called 'hitch' has been added; 8 are required, and they allow the box to be closed by pressure. In my case, I placed them in the holes of the bottom_case_75_cards and the upper holes of the mid_case_75_cards piece, as seen in the images. It is important to mention that they have been glued together, and it may be necessary to sand them a little to round off the piece once they are glued.

Example Print:

  • Material: Generic Translucent PLA
  • Layer height: 0.2mm
  • Infill: 15% Gyroid
  • Infill for hitch: 100% rectilinear
  • Print Temp: Hotend - 205C, Bed - 65C (It is recommended to make a temperature tower and adjust to the temperatures that work best for your material.)
  • Fan: 100% after layer 1
  • Supports:
    • Only needed for the mid_case_75_cards piece to support the bottom. If your printer can make bridges that long, it is not necessary but recommended.

Tags