Mini R50 R52 Battery Case Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a 3d Printed Brace that reinforces a old Mini battery box/container after its plastic support structure fails.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
My 2006 R50 Mini Cooper's battery plastic support failed. So I designed a part that fits on top of the metal support and pushes against the battery box. The Air box mount then fits on top of the 3d printed part and the Mini/BMW Bolt then is fastened on top. Helps avoid having to buy a new battery box.
Note: I have an AFE aftermarket cone air intake system so this part might need modification to work with other brands or a stock Mini intake box.
Printed in Both ASA and Flex. ASA has more rigidity but the Flex is easier to get the Screw into place with a small socket. I ended up using the Flex print because I had difficulty getting the screw in with the ASA part.