Hyundai/Kia Qi Wireless Charger Mat Magsafe Converter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mat to allow use of a MagSafe Charging puck on Kia/Hyundai vehicles with Qi Charger mats. Tested in Hyundai Venue.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 639
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I found the wireless charging mat on my Hyundai Venue to be quite lacking, probably because my phone has a case on it. My phone would overheat and not charge at all when placed on to the mat.
Instead of taking the case off every time I drive, I designed this adapter to insert into the existing Qi rubber mat and plug into the USB-C port of the car. It also includes a cutout for the camera bump so the phone sits flat against the charger.
Used some double-sided tape to secure the charger, and some painter's tape to keep the cable within the coiled area (see pictures). Uses the standard apple Magsafe wireless charging puck.
Tolerances are tight, would advise printing at 100.5% scale if you are worried your printer will not deal well with small tolerances, or if you have trouble inserting the magsafe puck.
Pictured printed in PLA w Carbon Fiber at 0.2mm layer height, supports enabled. Easy enough to remove supports by sticking a pen through the cable hole.