Bed side holder for phone(tablet) scalable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
scalable bed side holder
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is made specifically 100mm wide to make it easier to scale.
Place it as in the picture, make the same supports, chamfers, roundings and bridges are designed to print exactly like this.
If you print differently, it may not work.
example:
the pocket is made 100mm wide and 16mm deep.
measure the phone, mine is 76mm, make the scale only along this axis 80%, if you do it like in the picture, then it is y.
you will get a pocket exactly 80mm.
It also works in the larger direction.
it also works in height, but the height should be suitable as is. the standard pocket height is 140mm.
I print on a bedslinger, so I place it like this, because it is more stable.
bedside is 22mm