The Legend of Zelda: A Link to the Past Boss Key
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ever wanted to print a boss key from A Link to the Past? Well now you can! This model consists of two pieces.
- Ocena
- 5 / 5
- Polubienia
- 102
- Pobrania
- 339
- Wydruki
- 4
- Wyświetlenia
- 1145
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
Ever wanted to print a boss key from A Link to the Past? Well now you can!
This model consists of two pieces. One should be printed in black while the other in gold or yellow. If your printer is nicely calibrated then these pieces should snap together without much resistance at all. If the pieces don't sit snug, a dab of super glue should do the trick.
If you like this, check out my other designs. Also, please post a make. Thanks!
Print instructions
Category: Props Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 10%
