Weighted Cord Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a weighted cord organizer for a 140W USB-C power adapter for a MacBook.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple object to keep cords organized on you desk. I created it specifically for the 140W power adapter cord for my MacBook Pro but it should work for other cords as well. The base is hollow so you can pause the print and add sand or bbs or something else to add weight. I used fine sand and the weight is good.
Print settings:
Filament: PLA
Infill: 15% or whatever you want
Supports: No
Brim: No
Pause at around 32mm ( layer 160 at .2mm layer height ) to add weights if desired. I used fine sand for mine but I might suggest something like BBs if you have them. The fan on my Prusa MK4S blew the sand around and made a bit of a mess. I had pause the print, vacuum up sand and then put a piece of scotch tape over the sand hole to continue the print.