Liczymy pasujące modele…
A stand to hold the laptop at an angle, so the display is in line with an external display. Print instructions I printed this with 0.2mm height and 15% infill, and it seems strong enough.
I created this box to be able to store the charger for my 13-inch MacBook pro. I was tired of finding the charger and cable at the bottom of my bag in bulk! I searched on the internet for something that would meet my expectations, but I…
I remixed this for a friend so that it would fit the notch on the 2021 MacBook Pros. Don't print higher than .15 for best results. Going lower is okay but maybe not necessary. Remixed from: https://www.thingiverse.com/thing:3034483
Study laptop stand. It elevates the screen and brings it closer to you. You'll want an external mouse and keyboard. Based off of https://www.thingiverse.com/thing:1330829 . This was tested with an M1 MacBook Air, but should work with any…
Stand for MacBook Pro 2021 14 / 16 (M1 Pro, Max ) Upon looking at the sizes for the M2 MacBook Pros, this stand should still work, though I don't have a computer to test it. Printed in PLA 0.2mm Layer height 10% cubic infill No supports…
Hi, I designed a desktop stand for your MacBook, when using a monitor. fits: MacBook Pro 14” MacBook Pro 13" 2016-2021 Should fit the Macbook 16” if it fit the 14” -Settings recomendations: -Print with PLA/PETG, minimum 3 perimeters. -30%…
If you wish to hang your MacBook or any other laptop on the wall with the help of Ikea Skadis system like me, then this is the must-have accessory. This bracket helps you to hang a laptop onto your Ikea Skadis board, with no waggling in…
Use your phone or tablet together with your laptop as a second screen. Can be stretched/shortened to fit laptops of different sizes. Print profiles included. Differences between versions: Macbook version - use this version if you have a…
Nozzle used for printing - 0.4 mm Layer height - 0.2 mm Print duration approximately 3 hours Without supports
Needed a palce to put my macbook in the living room when im not using it, so I remixed the other bracket to make a low profile option. I put clear tape over the screw holes to protect against scratching Mirror the bracket in your print…
Minimalist stand simply to get the base of the Macbook elevated and provide some ventilation. This resolved the overheating problem I was having and which caused the CPU to throttle down. I designed this for a 2019 16" Macbook Pro with…
I needed to clear up some deskspace, Inspired by: https://www.printables.com/model/48360-macbook-pro-15-mounted-vertical-desk-holder I made my own so that I have easy access to the charging & usb c connection. Added some top secures. Even…
This is hold my Spyrus Key on the side of my MacBook Pro 2016
display mount that fits on to your laptop display. can be adjusted for sizing for your display as well as your laptop.
Nozzle used for printing - 0.4 mm Layer height - 0.2 mm Print duration approximately 3 hours Without supports
Separador superior para macbook m1 pro (puede servir en otros modelos posteriores) en soporte vertical permitiendo que se salga el sonido de los altavoces integrados. Sin esta pieza, el sonido queda muy bajo al estar tapadando los…
Optimize your workspace with this sleek and modern vertical MacBook stand! Designed for stability, space-saving, and style, this stand keeps your MacBook upright and secure while enhancing your desk’s aesthetics. 🔹 Modular Design:…
I needed something to prop up my adapter when plugging into the seat power on the plane so it wouldn't fall out of the socket. Written in FreeCad 1.0.2 and fully parametric.
Update: v2 has better print stability Unfortunately, the MacBook Pro doesn't open as far as some other laptops. This stand has the highest elevation possible, the screen will be exactly vertical when fully open. Designed with MacBook Pro…
Mount your MacBook Air on the wall for a wireless desk. I used Thunderbolt extenders and a uGREEN Revodok Pro 2111 dongle to charge my MacBook and to run my 2 monitors, stereo, and peripherals. One Thunderbolt 4 cable has to be run…
This is an adapter for an LG 6K monitor that allows you to place a 14-inch MacBook Pro on it, so the bottom of the Macbook will be not scratched. It will fit only the 14" Pro model. If required, I can make an MacBook Air version. This…
Cable holder for Macbook charger. Specifically made for the longer apple cable and charging brick. Brick snaps onto the side and in the middle.
This is a Charger mount for the 87W MacBook Pro charger. Two versions are available for right or left mounting. the design includes stress relief for the charging cord, which can be reinforced by adding zip ties to the ridges under the…
Theres an attachment where you can put wrap the wire around. The attachments will fit into an oval slot on the case.
The plug housing is designed to fit UGreen USB-C cables, adjustments will be required to firmly grip other cable types.
This is a dock for a MacBook M2 16". I use it to stand my MacBook up while I have it connected to a USB C dock. I put little risers in the bottom of the stand and vents to allow heat to escape. Only needs supports for the back opening.
Wall mount holder for MacBook Air M1 2020 with 2 type-c ports. I used this type-c adapters:…
Hello, I have here for Stand for apple mackbook air . Nice minimalist stand for your Macbook Air . You have 2 versions from me... v2 is better for me. The stand bears the logo of the bitten apple. Printing is not demanding! Good luck with…
Passive Cooling Stand for MacBook Pro 14" To complete the assembly of your 3D-printed heatsink stand, you will need to source the following off-the-shelf hardware components: Bill of Materials (BOM) / Required Hardware: 1x Aluminum…
To hold the devices three brackets will need to be printed, they can then be mounted with three countersunk screws with max head sized of 10mm. Double sided tape was used to attach some cork to the inner faces (any soft material will do).…
I tend to use my Macbook with an external keyboard, monitor, and mouse, but sometimes I want both the external screen and the laptop screen available. Putting the laptop on a box/riser sort of works, but the screen is then too far back…
This Macbook Air M1 2020 vertical stand has on one side 3 USB A and 4 USB C to store different usb accessories. Not tested with newer Macbook Air/Pro models but maybe can work for those too. Model printed with PLA but can be printed in…
Print 2, drill holes or use VHB tape, mount. will not fit Apple Silicon MacBook pros
This is a stand for a Macbook Pro 15 inch (retina) from 2012. It fits nicely. The notebook gets enough ventilation and it looks gorgeous :-) Category: Computer
A stand for a 16" 2019 Macbook Pro. It is stylish, sturdy and easy to print.
Simple Strong Sturdy Stand for a 2018 Macbook Pro 13 will work with any laptop up to 14.8 mm thick. Use a thicker linewidth for strength I used a .6 nozzle with .6 line width with 20%infill feels sturdy enough because of the chamfers. Use…
These stands are designed for the current 16in, 14in MacBook Pros and 15in MacBook Air. The laptop gap is 18mm, 17mm and 12.5mm respectively. The venting ports allow for air circulation from either side. For those of you who are new to 3D…
Overview The BookKeyPad is a stand that positions the Magic Keyboard and Magic Trackpad together like a MacBook. The name pushes the words together just like the 3D model does to the accessories. The stand tilts both Magic Devices so they…
Under desk mount for MacBook Pro 16" M1. Used 4 screw for wood 4x40 mm Printed in PLA with 0.2 layer height edit: new version with better cut for big hdmi plugs and memory card Thanks Moritz Sch. for original design
I needed a holder for a 16" MacBook Pro for mounting under a shelf. All connections are accessible and ventilation slots are also available. Printed with support and added some foam rubber to prevent scratches.
Made a hotglue mold to fix my wifes frayed macbook charger cable. The two cable dimensions are 4,7mm and 3,1mm, so if your charger have the same dimensions, this model will work for yours too. Otherwise feel free to remix my model or be…
M1 16 inch Macbook Pro Wall mount The mounts uses 4x M6 size holes (7mm). The macbook fits loose, to allow you to grip it from the back with your fingers to add or remove. This can hold the Macbook vertically or horizontally.
This model allows you to insert two Thunderbolt 4 (USB-C) cables which will be properly aligned so that you can connect and disconnect them both at the same time from a MacBook Pro. It essentially turns them into a single plug. I use my…
I wanted to stand up my MacBook Pro along the back of my desk to give me more usable desk space. I couldn't really find any options I liked, so I decided to make my own. I did my best to replicate an Apple-esque style, using very close to…
This is a a MagSafe cover for a 2015 MacBook Pro charging cord that is meant for protecting damaged cords from breaking more. The two halves have press-fit pins, no glue required.
After picking up an M3 MacBook Air, instead of getting rid of my mid 2015 MacBook Pro I decided to upgrade the operating system with OpenCore Legacy Patcher and I confirmed the old laptop is still perfectly usable for every day (non-power…
This stand is a versatile and adjustable stand designed to hold laptops, iPads, or MacBooks securely. Its adjustable width for devices of varying sizes, with a range of 1.5 cm to 2.8 cm, ensuring a snug fit. This stand blends seamlessly…
An easy Magsafe Power Adapter Cable Fix for broken cables. You just need additional 2 zip ties
display mount that fits on to your laptop display. can be adjusted for sizing for your display as well as your laptop.
A simple wedge to put the macbook on, so that the macbook display will line up with the main display.
A simple 2x2 bin with some finger holes cut through the sides to store a MacBook charger. Also useful for chargers of similar size by Anker or other brands (as shown in photos). Designed for North America and Japanese chargers, but if you…
A Stand for a 16inch+case macbook pro (I didn't design it it was made by jens j).
Three-slot multi-stand for my MacBook Pro (13-inch, 2018), Wacom Tablet and iPad. Width of slots Main slot (Macbook) - 18mm Secondary slot (Wacom Tablet) - 14mm Third slot (Generic, iPad) - 16 mm Print Settings Printer Brand: Ultimaker…
After printing several stands, i've designed my one :) Main goals: - High stability - Minimalistic design - Perfect angle for MBP Tested and perfect for: - MacBook Pro 2019 16" - MacBook Pro 2023 14" Printing: Print it on the side, no…
This 3D-printed USB-C Plug Holder is designed specifically for the MacBook Pro 16" (2021) model. Its primary function is
Remix of universal laptop stand with some additional storage compartments. No supports needed.
A remix of a cable strain relief VGA imitation made for MacBook MagSafe. Print with supports. Light sanding and glue required. Make sure to use a small 1.5 drill bit to get a nice and clear hole for the MagSafe charging status light.
While taking care of cable mess I had a dream. If there only was something that could handle powersupply units with ease, free me from zipties and stuff. Suddenly! My dream came true... Macbook pro 15 power supply now can rest in this…
A sturdy replacement for 15-inch Macbook Pro 2015 factory made feet The main load is distributed around the feet indentation and there's glue channels allowing to reliably attach the feet Print notes No supports needed TPU recommended,…
Hello! This is a replacement model for a MacBook Air or Magic keyboard command key. The model in itself isn't completely optimized but it should work, that's why I provided the files so that better designer's then me can improve it. Huge…
(English) Description Organize your desk and keep the MacBook Pro M1 charger securely mounted with this minimalist wall holder. Designed for convenience, it uses high-adhesion double-sided tape, avoiding the need for screws or drilling.…
Created this insert to use my Macbook Air M2 with an existing BookArc vertical macbook stand. 95A TPU filament 15% Hilbert Curve Infill .36mm layer height* Tree support touching buildplate * It's a simple print so any layer height…
Ultra slim foldable feet for MacBook Air with ergonomic shape and round platform. I designed these feet after running quite demanding application on MacBook Air M3 and noticing increased heat level. Main criteria was to keep design curved…
There is two models, one with iPad stand in front of MacBook keyboard to use as second monitor and one without it. Each one is made with 50 degrees of tilt. For MacBook is made 9.70mm of space. For iPad is made 8.00mm of space. I leave…
I was tired of looking at my charger sitting on the ground. This hanger fits nicely in the hairpin legs of my bar table. There are two variations for flat bars legs as well. Hairpin legs: ¾" diameter, 40" length ( purchased from Etsy )
I printed in PETG, decent wall count I don't remember, make sure to print one mirrored!
Supporto verticale per MacBook Air M1 adatto anche a altri modelli con spessore inferiore a 17 mm Dotato di fori per viti M4 e con testa di 8 mm ad incasso di 3 mm (interasse 140 mm)
This model is a modified version of the 16" stand found on Thingiverse: https://www.thingiverse.com/thing:5140925 . While the simple design of that stand was nice, there were some problems. Obviously, a 16" stand isn't great for a 14"…
This is the model based on the original Golden Triangle Design . These are two alternative options that raise the base to heights of 50 mm and 80 mm, offering a slightly elevated stand. Two stands are required, fitting Apple MacBook Pro…
Separador superior para macbook m1 pro (puede servir en otros modelos posteriores) en soporte vertical permitiendo que se salga el sonido de los altavoces integrados. Sin esta pieza, el sonido queda muy bajo al estar tapadando los…
I'm a Multiboard convert, both for general wall-based organization and for underdesk cable management using @HandsOnKatie_827995 's fantastic Underware system. I wanted to mount my MacBookPro's 96w power supply under the desk, but…
This mount is designed for use with Apple's 140-Watt USB-C power supply. This fits the model included with my 2021-era MacBook Pro with M1 Max processor. It can be used to mount the charger under a desk, horizontally, or on a wall,…
I saw a model like this, but for the newer and slimmer models of the apple macbook air. So this version is for the a bit thicker macbook airs. You can also download the f3d model for editing
Lovely design from Corvus Oculum. I've remixed it to an 18mm slot for current MacBooks.
(ENGLISCH BELOW) Hallo zusammen, eines meiner ersten eigenen 3D-Modelle die ich selber entwickelt habe. Diese Halterung dient dazu, das MacBookPro 15 unterhalb eines Regalbodens zu verstauen. An der linken Seite ist genug platz damit das…
Minimalistic vertical stand for Macbook Air (M1). Weight about 50g with Bambu Studio default settings (0.28mm layer height), printing time 1h 25min.
Designed to display and store various old Macbook Pro Laptops. Ondsel file is included for remixing.
Wall mount dock for M3 Macbook Air. There is access on the bottom for all of the I/O and power connectors. Feel free to tinker: https://www.tinkercad.com/things/cSTuZ04uMKJ-13-m3-macbook-air-wall-dock
I created a custom expansion memory card adapter for the MacBook Pro, designed to integrate additional storage up to 2 TB. This project involves soldering a microSD card to PCB that fits into the MacBook Pro's SDXC expansion slot. Once…
Modelled as separate parts for faster and easier printing. All three parts should be glued together using cyanoacrylate or similar contact adhesive. Also, some kind of soft fabric should be glued inside. Works pretty well, doesn't scratch…
I needed one so I created it. I have printed it without bottom and top fill with honeycomb infill. I recommend to glue silicon foots or straps for better drag. Print Settings Printer Brand: MK3 Printer: Prusa i3 **Rafts:** No Supports: No…
To make this toy MacBook with the multi-material the two models are: The top case macbook-apple.stl macbook-cover.stl The bottom case/keyboard macbook-keycase.stl macbook-keyboard.stl macbook-keys.stl macbook-letters.stl Printing is…
Made an easy webcam cover for Macbook Air 13 inch 2022 model. The cover stays in place with just friction. I think it will work on M1 and M3 aswell but i have not tested yet. Try it out and let me know if you like it! One side is 0.25mm…
Stand for 4 MacBook Pro M1 Pro 16inch, remixed from an existing model. No support needed. For best durability, print it vertical. It is a 3D printable stand that can be used to prop up four MacBook Pro M1 Pro 16-inch laptops. I printed it…
![MacBook Laptop Stand [Updated]](https://media.printables.com/media/prints/3c14bea5-dc77-4fe4-b8bf-c1c427796683/images/12569124_ac004dc9-3286-49af-8786-9c781b0a7320_a0f2e034-e253-488f-91ad-97390eed81f3/img_3506.jpg)
