Airbrush Cleaning Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This cleaning pot has a airbrush handler and a filtered exit for fumes. The lid screws securely onto the container, to prevent the possibility of contents spilling.
POT : No brim or support necessary.
LID : no brim. Easy to remove support.
FILTER : Use cut-to-fit standard activated carbon filter or cut-to-fit MERV filter roll. Personally, I use a small cotton ball on which I stick a mini air filter for mushroom cultivation (see link and image).
on amazon : https://a.co/d/g63v91K
FOR THE LID :
- Enforce snug support only inside the lid (see image).
- Use 50% density and 3mm expansion for the first layer.
- Use 4mm pattern spacing, no interface and 50% xy separation for the other layers.
IMPORTANT : On the first try, the lid may be slightly difficult to screw onto the container. This is normal because the threads must fit inside each other. This will fade after a few tries.
Design
Designed using Tinkercad and Blender.
I'd love to see your makes and hear your feedback—feel free to share your prints and comments!
Explore more of my free designs
You might find something that sparks your interest: https://www.printables.com/@iSkull3D_1939109/models
Thanks for your support!