1 / 1
Calipers Stand - Gridfinity
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Introduction
I wanted a Gridfinity bin for holding my calipers in an Ikea Alex drawer but also me smaller in footprint. I found a model online but it was for regular calipers and I prefer these Neiko's that are consider “jumbo” screen.
It has additional holders for SD Cards and USBs, they came with the model I modified.
The file I originally modified was an STL, but I could recreated it in Fusion360 if somebody truly needs it.
Compatibility
This bin is made to fit the NEIKO 01401A 6-Inch Electronic Digital Caliper
Print Settings
I only tested with my usual settings but here are the big ones below
- Filament: Bambu Labs PLA Matte
- Layer Height: 0.10 - 0.20mm
- Infill: 15% is what I used, I imagine you could lower or higher
- Infill Pattern: Gyroid (I used this for everything)
- Walls: 3 walls for me