1 / 4
Ubiquiti Unifi USW-Flex-Mini 2.5G 5 10-inch rack mount — zdjęcie 1
1 / 4

Ubiquiti Unifi USW-Flex-Mini 2.5G 5 10-inch rack mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-Mini 2.5G 5

Ocena
5 / 5
Polubienia
113
Pobrania
1118
Wydruki
6
Wyświetlenia
6347
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A 10-inch rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5.

To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press them a little so they can compress and enter the mount, it is a tight fit, but after that, the switch should slide in and stay securely in place.

If your printer doesn't have good tolerances, I have included a second version of this model with a higher tolerance, giving the switch more space to fit in.

Update (05/10/2024): I've replaced the high tolerance version with some small adjustments, so the switch won't be too loose.

Do you like my models? Consider buying me a coffee ;)

Print Settings

Printer Brand:

Sovol

Printer:

SV04

Rafts:

Doesn't Matter.

Supports:

No.

Resolution:

0.2 or 0.24

Infill:

15% or more

Filament: 

PLA+/PETG/ABS/ASA/Nylon

Tagi