Liczymy pasujące modele…
A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
Simple spacer that raises the switch by 2cm. It leaves a horizontal cooling channel below. A fan placed on the side can cool both the Flex XG and the device below it. It's designed to rest inside the switch's wall mount cutouts and…
A 6-inch rack mount for the Unifi USW-Flex-Mini. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings Rafts: Doesn't…
Simple mount for a USW-Flex-2.5G-5 to go on Skadis board. Printed with tree supports in PETG Hope someone finds this useful
Wall Art Silhouette of the Lamborghini Urus. Adjustable size. I accept model suggestions or ideas you have.
Remix of Vietnam Airsoft's AAP01 USW kit. Tolerances of the original kit were too tight to be printed. Credit goes to Vietnam Airsoft for the original kit
The recent release of the USW Pro XG 8 POE has a lot of people excited due to it's small form factor with 8 10G-BaseT POE++ ports and 2 SFP+ ports. However, the switch appears to run quite hot. Idle temperatures with minimal ports…
A 7-inch rack mount for the Unifi Unifi USW-Flex-2.5G-5. This model is compatible with the GeekPi RackMate TT (Affiliated link). This model is part of a series of 7-inch rack mounts I've designed. You can check out the others here . Do…
Haven't seen any rack mounts for this model of switch, so I thought I'd make this myself. It's the switch flex, model name: USW-Flex (46W), that is able to take in a PoE++ and output 4x PoE. This model holds two of them side by side,…
This is a mount for the detachable VFD (Variable Frequency Drive) control panel for a SUSWE model SU800900 VFD. These are a very nice, inexpensive, Chinese inverters used to operate a large three-phase motor at variable speed. The small…
A stand for all the stuff on my desk. This includes a holder for the FinePix F50fd, as well as a rack for cards and USB
Karten- oder Ausweishülle im hoch oder quer Format. Zusätzlich gibt es eine Abdeckung um das Herausrutschen der Karte weiter zu erschweren. Card or ID holder in portrait or landscape format. It also features a flap to further prevent the…
Printed with reality hyper PETG-CF 50 percent infill Tree supports for the lip only I would use at a minimum regular PETG or anything that has a good temperature resistance. I would avoid PLA variants due to potential warping
Offsets the switch slightly backwards to compensate for the shift forward for the width of the mounting surface, and gives more room for cables in a tight rack Use M4x14 or M4x16 Cap head screws to attach them Print vertically, 3…
Mod10 Rack Mount for Ubiquiti USW-Flex-Mini 2.5Gbe This is a 10-inch rack mount for the Ubiquiti UniFi USW-Flex-Mini-2.5G-5, designed for use in the Mod10 mini server rack (or any standard 10-inch rack). This is a remix of @mauker's…
Mod10 Rack Mount for Ubiquiti USW-Ultra A 10-inch rack mount for the Ubiquiti UniFi USW-Ultra, designed for use in the Mod10 mini server rack (or any standard 10-inch rack). This is a remix of @Mauker's design with improved tolerances,…
This is a simple wall mount to hold the trailing PSU shipped with the USW-Lite-8-PoE. I believe the same PSU is used on a number of their units. I printed the plate in Polymaker Polylite White ASA using the standard Voron parts profile.
Der crw-f1 ist wohl der Beste Audio CD Brenner, und ich werde mich nicht von ihm trennen nur weil der Knof defekt ist. Die Blende ist mit 3 ABS Laschen am Player eingerastet die schneller brechen als ein Schnellball in der Hölle schmilzt,…
PLA Füllung 20% Schichthöhe 0,2mm ohne Stützen, ohne Rand
Ich hab die Idee aus dem Netz mal aufgegriffen und für den deutschen Perso angepasst. Das ist mein erstes Modell also bitte seid gnädig. Für Anregungen, Verbesserungen und berechtigte Kritik bin ich sehr dankbar. Leider konnte ich das nur…
Die Originaldatei hat einen Augenabstand Unterkante Personalausweis bis Mitte Augenpaar von ca. 26mm. Da dies nicht immer passt habe ich mal ein paar Variationen angelegt. Ihr müsste also lediglich diesen Abstand messen und die jeweilige…
Ein verbessertes Teil, das beim original Model nicht so gut gelungen ist.
Prozessor: PIC 12F675 Passender Summer: https://www.amazon.de/gp/product/B00JM1XZL4/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Programm: https://github.com/Scorch1262/Filament\_Sensor\_Auswertung\_MK1 Sensor:…
For the lack of mounting points on the Unifi Flex Mini switch I designed this simple wall mount case. It exposes all ports. Print it as is without support. I used a 0.2mm layer height. Mounts to the wall with 2 smaller screws.
Update 2024-10-05: I finally got the switch and my original print didn't fit exactly right. So I made a modification to the curve of the main body holding the switch. It should work now. New photos uploaded. Remix of:…
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press the a little so they can compress and enter the mount, after…
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-Mini. I have included two versions of this mount: For two USW-Flex-Minis For a single USW-Flex-Mini To install your switch to this mount, simply slide it in. But once you reach the…
NOTE: the front part needs to be flipped upside down before printing
A 10-inch rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press them a little so they can compress and enter the…
An unofficial wall/table mount for the Ubiquiti Unifi USW-Flex-Mini 2.5G 5. It can be either screwed in place with two M3 screws or attached with double-sided tape. I have included Three versions of this model. Open mount: Uses less…
Remix of the Open wall mount with tabs added at the bottom to allow for vertical mounting.
Remix for the USW-Flex-2.5G-5. Unifi Switch Flex Mini 2.5G Modell For all the people which upgraded from the 1gig Model and wants to use the same mounting holes. Print as you want all options are fine
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
A modular 19-inch rack-mount adapter for the Ubiquiti Unifi USW-Ultra. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find out…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-16 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
Stack two USW Lite 8 or Flex Mini switches on top of eachother! Works while one is mounted to the wall. Also works while horizontal. No need to disconnect any cables. Plenty of space between switches to keep them cool. Stock wall mount…
Simple spacer that raises the switch by 2cm. It leaves a horizontal cooling channel below. A fan placed on the side can cool both the Flex XG and the device below it. It's designed to rest inside the switch's wall mount cutouts and…
Es ist das Verbindungsstück das den Bulletfeeder mit der DAA Feder verbindet. Bei Kaliber .45 hatten wir des Öfteren klemmende Geschoße, da diese nicht schnell genug, die sich drehende Collector Plate verlassen haben. Mit diesem…
A minimal friction fit wall mount, designed to hug the Ubiquiti Flex Mini switch perfectly. The switch's rubber backing provides for an excellent friction fit. Mount with the tip of the teardrop downwards (added to optimize for FDM…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti UniFi Switch Ultra from the Blank Module The module will also work for USW-Ultra-60W and USW-Ultra-210W The ESRack system includes…
Drop Insert 45ACP, remix by GerHART & Dewz.
Basic 19" rack mount ears for Ubiquiti Networks Unifi Pro Max 16 switch Should fit both the non PoE (USW-Pro-Max-16) and PoE (USW-Pro-Max-16-PoE (180W)) variants. Printed with generic PLA-CF, 3 walls and 50% infill on a BambuLab X1 Carbon.
Rackmount for Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W). 3 screws betwen : ISO 10642 (DIN 7991) M6x20 + Square NUT M6 10x10x3 I used PETG.
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-XG 10G switch. Add this sweet 10G switch to your 10-inch rack with this mount! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here .…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Flex-XG. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find out…
Based on Unifi USW Flex Mini Wall Mount - simplified. Adjusted to fit the Unify USW Flex Mini 2,5G
(DE) MultiHolder Tool mit 3 auswechselbaren Nüssen M6/M8/M10 und Biteinsatz im Handgriff. Natürlich nicht so stabil wie geschmiedet, aber das wissen wir ja alle ;-) Im Handgriff mit Sechskantaufnahme für einen Bit Im Handgriff Bohrung für…
Use two 6x3mm neodymium magnets. The cable channels on the bottom can fit up to 6mm diameter cables. Using two small strips of soft fabric tape inside on the sides makes for a light friction fit without scratching the case. The cutout for…
Updated original design to support mounting on multiboard tiles.
Da ich meinen USW Flex mini an die Wand hängen musste und keinen Wandhalter hierfür hatte, habe ich mir einen gedruckt, bzw. im Endeffekt sind daraus 3 Versionen geworden. Die Wandhalter sind alle 3 so ausgeführt, das es innen kleine…
An under-desk mounting frame for an Ubiquiti UniFi USW-LITE-8-POE switch. Printed with PLA filament and support structures only in the relevant places. Temperatures, Speed and Material Filament: PLA Printing speed: 120,0mm/s Layer…
I broke the outer shell on my USW Flex Mini and wanted a nice basic shell to keep it safe. I made this one to fit the switch and have the port in the back. Please feel free to modify and upgrade this design.
Ein kleines Plättchen und ein Ständer für die Plättchen. Die Idee ist es aus jeder Filamentfarbe die sie haben so ein Plättchen zu drucken. Diese kann man dann in den Ständer stellen. So hat man zu jeder zeit einen farblichen überblick…
(DE) Einkaufswagen-Chip im “112 Feuerwehr ” Design, nicht nur für Feuerwehrleute! Passt optimal in den Einkaufswagen und lässt sich nach der Entnahme des Wagens sofort wieder aus dem Münzschlitz ziehen. Sehr sehr schneller Druck und trotz…
Ich habe erst mal mit PLA den ,, Anreiser ‘’ gedruckt aber besser wäre es wegen der Belastung mit PETG oder ASA zu drucken
10 Inch rackmount for USG unifi 8 port poe lite switch. Its a tight fit, to slide in push on rubber feet to be able to slide. No damage to device.
You will need: 2x countersunk head screw M4x10 to attach the PoE Adapter to the plate 2x threaded inserts M4 2x screws to attach the holder to a wall or something Best to print in PETG, 0.2 and supports on built plate only
Remix of the original bracket to support the Multiboard with the ability to be swapped without removing the pegs. Requires a few supports, but the automatic supports should be enough.
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-2.5G-8-PoE switch. Add this switch to your 10-inch rack with this mount! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have…
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-2.5G-8 switch. Add this switch to your 10-inch rack with this mount! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have…
A modular, 2-part, 19-inch rack mount adapter for the Ubiquiti Unifi USW-Flex-2.5G-8-PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
A modular, 2-part, 19-inch rack mount adapter for the Ubiquiti Unifi USW-Flex-2.5G-8. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…
The USW-Flex-XG switches are known for poor thermals since it has no vents and internal fans. So I made some minimalistic spacers to avoid stacking directly on top of each other. This is a very simple standoff for stacking USW-Flex-XG…
Mount for the Ikea Skadis system to mount a Unifi USW Flex 8 port PoE switch. M3 countersunk screws are used to the mounting.
A 6-inch rack mount for the Unifi Unifi USW-Flex-2.5G-5. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings Rafts:…
A 6-inch rack mount for the Unifi USW-Flex-Mini. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings Rafts: Doesn't…
Mounting option for Unifi USW Enterprise 8 PoE for a 10inch rack. May not work with all 10inch-racks since the switch is actually behind the mounting rails, that is why it also has to be 2U high. I had this model designed and printed for…
The v4 file will give you four extra BBs in the magazine, but you will need to remove the screw that retains the magazine spring. The v1 file will not give you any extra capacity, but you don't need to remove the screw.
Unifi USW-Flex-2.5G-8-PoE Network Rack with Keystone Integration. A remix / resize of the one @Horrorshow did.
Use suitable refractory filament only or a battery powered tealight! No support structures needed. By the way: I hate valentines day, but I did my best / made it for glory… ;)…
Made a model to organise network cables on my desk whilst seating my USW-LITE-8-POE on top of them. My 1st attempt at a full model to fit an actual device, so very much a version 1. What's wrong with it (being picky): The cable entry port…
Boxen Halter oder Zylinder halter (organisator) siehe bilder
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Not even the Transformers are safe from being turned into Among Us spacemen. Suswave is ready to deploy into battle. For the best quality, I would recommend adding organic supports. The figures are really tiny, so I would also suggest…
It’ll be a cold day in hell before I waste my precious PLA on support material. After countless iterations, I’ve nailed it—a snug, snap-fit under-desk mount for the Ubiquiti USW-Flex-Mini gigabit switch. Prints in 37m51s on my P1S, using…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection NUC version - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone…
remix from 6.5 inch rack If you enjoy my work, please consider support at link in profile. Change Log 2025/03/11 change name 10 inch USW Flex 2.5G-5 with Patch Panel A > 10 inch USW Flex 2.5G-5 right label 10 inch USW Flex 2.5G-5 with…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection NUC version - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone…
remix from 6.5 inch rack i dont have device to test this print, use at your own risk My print settings layer height: 0.2 wall: 3 infill: 15% If you enjoy my work, please consider support at link in profile. Change Log 2025/03/11 change…
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-16 PoE. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Parts 4x M4x10 or…
Das ist ein Regal Einsatz für die Einstiegsmodelle der Trigano Gruppe (Challenger V114, Forster, Chausson, usw.) Damit ist es möglich den Stauraum im Bad deutlich effizienter zu nutzen. Am Besten in PETG oder mit einem anderen…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti Unifi Switch Flex 10 GbE USW-Flex-XG from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the…
Simple mount for a USW-Flex-2.5G-5 to go on Skadis board. Printed with tree supports in PETG Hope someone finds this useful
Stützen sind erforderlich. Supports are required.
Lustige Hülle passend für einen deutschen Personalausweis in Batman-Optik Druckzeit ca. 3h mit Bambu P1S PETG HF + Baumstützen
Runde Dose mit Loch für einen 0,5cm dicken Docht als Trinkmöglichkeit für Schaben und Käfer. Die Schaben saugen das Wasser aus dem Docht ohne dabei Gefahr zu laufen ins Wasser zu fallen und zu ertrinken. Printed in PLA 15% infill no…
I'm sure there are people which replaced their UniFi Lite 8 PoE (USW-Lite-8-POE) with the newer Flex 2.5G PoE (USW-Flex-2.5G-8-PoE). However, with that comes a new wall mounting adapter plate which has a different horizontal hole spacing.…
In English: https://www.printables.com/model/1294646-pet-feeder-with-rtc-servo-arduinoesp Der Fütterungsautomat kann kleines Futter zeitgesteuert, z.B. jeden Tag um 18:00 Uhr, ausgeben. Dazu wird ein Servo, ein auf dem…
DIN Rail Clip Mount for Unifi USW Ultra 60W This is a custom DIN rail mount designed for the Unifi USW Ultra 60W . It may also be compatible with other Unifi USW Ultra series switches. Features Attaches using the original mounting plate .…
Kleine rotierende Teile auszuwuchten kann eine sehr langwierige und diffizile Angelegenheit sein. Die Reibung beim statischen Auswuchten zu reduzieren, kann man Messerklingen verwenden, die man mit diesem kleinen Druck parallel ausrichten…
I wanted to have a small air gape between the switch and my computer under it so I quickly thrown a couple of measurement on OpenSCAD to make the file. Have fun.
Hier für den IKEA POÄNG Getränkehalter eine überarbeitete Version von mir. Diesmal zweiteilig zum Drucken, mit einer Schwalbenschwanzführung. Falls Fragen einfach melden.
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. This is a version of model 1015913 with less print material.
Diese 3D-gedruckte Sammelstation wurde speziell für Durable 8005 Ausweishalter entworfen und ist auf die hochkant ausgerichtete Steckweise optimiert. Ideal für den Einsatz in Büros, Empfangsbereichen oder auf Veranstaltungen, ermöglicht…
Rackmount for Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W). 3 screws between : M3 x 20, M3 Threaded Inserts. Items: 3x M3 x 0.5 mm Thread Size, 6.4 mm Installed Length 3x M3x0.5mm 20mm Socket Head Screw Cat5, Cat6, or Cat6A keystone…
I made a new Remix of this model. if you already have the Unifi USW ULTRA mount from Mauker this will fit his mount. It can now be printed face down with no support. added Keystone slot left side ore right + A model with more polygon to…
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-16 PoE. Parts 8x M4x10 or 8x M4x12 for the back and front cover. Optional: 8x M4 thread inserts. Use those if you don't want to screw the back , you can print the Main Body for thread…
![Durable 8005 Ausweishalter [Sammelstation]](https://media.printables.com/media/prints/febc1d86-8238-443b-92c7-db0d15ca7aa5/images/9628812_6ce7c41c-c406-47eb-9952-976d85da9744_6a5fbee1-d4fc-4eb1-88dd-85e4fb0d19e6/img_0076.jpg)
