1 / 3
10 inch rack Unifi USW Flex 2.5G-8-POE and 2.5G-8
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
can be use with * USW Flex 2.5G-8-POE * USW Flex 2.5G-8
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 529
- Wydruki
- 4
- Wyświetlenia
- 2077
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 7)Remiksy (0)Kolekcje (132)Powiązane
- USW Flex 2.5G-8-POE (212.9 x 99.4 x 33.5 mm)
- USW Flex 2.5G-8 (212.9 x 76 x 33.5 mm)
both model share same wide and height, so it can use same rack
for USW Flex 2.5G-8 just print adapter (small green one in image) and you can use M3 screw (HDD, motherboard screw) to hold it in place
about cable hole
i decide to use 5.8mm because, i dont know extractly size of adapter cable
in website it say DC plug: 5.5 x 2.1 x 11.5 mm, and i dont know which number is for what ?
i dont have device to test this print, use at your own risk
If you enjoy my work, please consider support at link in profile.
Change Log
- 2025/10/10
- Add V2 Model
- create new cable pass thought and fix ferrite core problem
- reduce shelf gap
- thx to @Repvik_49799 comment
- Add V2 Model