1 / 10
Ubiquiti Unifi USW-Flex-Mini 2.5G 5 Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Unifi USW-Flex-Mini 2.5G 5 wall mount. It can be either screwed in place or used with double-sided tape.
- Ocena
- 4,882 / 5
- Polubienia
- 124
- Pobrania
- 2239
- Wydruki
- 19
- Wyświetlenia
- 8303
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 19) (Komentarze: 30)Remiksy (4)Kolekcje (192)Powiązane
An unofficial wall/table mount for the Ubiquiti Unifi USW-Flex-Mini 2.5G 5. It can be either screwed in place with two M3 screws or attached with double-sided tape.
I have included Three versions of this model.
- Open mount: Uses less material, can be used to side-mount the switch.
- Open mount with tabs: Uses less material, can be used to mount the switch up or down.
- Closed mount: Uses more material, but securely holds the switch in any orientation.
Updates
- 03 Nov. 2024: I made the back of the mount a bit thicker and the spacing for the screws a bit larger (Closed V3). I have also added an open version with tabs. I have also added the Bambu Lab .3mf file.
- 11 Oct. 2024: Based on feedback, I increased the tolerance in the closed mount version and released the Closed V2.
Do you like my models? Consider buying me a coffee ;)
Print Settings
Rafts:
Doesn't Matter.
Supports:
No.
Resolution:
0.2 or 0.24
Walls/Perimeters:
3
Infill:
20%
Filament:
Any.
