1 / 7
Ubiquiti UniFi USW Flex 2.5G 8 PoE - wall or rack mounting bracket for switch — zdjęcie 1
1 / 7

Ubiquiti UniFi USW Flex 2.5G 8 PoE - wall or rack mounting bracket for switch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom 3D printable wall or rack mounting bracket for Ubiquiti UniFi USW Flex 2.5G 8 PoE switch – secure snap-in install

Ocena
0 / 5
Polubienia
15
Pobrania
120
Wydruki
1
Wyświetlenia
605
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Custom wall or rack mounting bracket for Ubiquiti UniFi USW Flex 2.5G 8 PoE, inspired by the original wall mount design.

This version is slightly narrower (5 mm) than the stock bracket for a improved fit. It requires a bit more force to snap the switch into place compared to the original mount, but in return provides a noticeably stronger hold - even when installed upside down.

The bracket features multiple mounting holes for flexible installation. It includes two dedicated holes for standard 19” rack mounting, designed for screw heads up to 12 mm wide and 2 mm high, and additional holes for standard M3 screws, where the screw head should not exceed 8 mm in width and 2 mm in height.

Recommended print settings:

  • Layer: 0.2mm

  • Filament: PLA or PETG

  • Infill: 15% (optionally 100% around the snap area for extra strength)

  • Supports: build plate only, organic, auto-generated, easy to remove

Designed for secure, clean, and reliable installation in home, homelab, office, or rack environments.

If you have any ideas on how to improve this model, feel free to share your feedback!

Tagi