1 / 6
Unifi USW Enterprise 8 PoE - 10 inch rack mount — zdjęcie 1
1 / 6

Unifi USW Enterprise 8 PoE - 10 inch rack mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounting option for Unifi USW Enterprise 8 PoE for a 10inch rack.

Ocena
0 / 5
Polubienia
13
Pobrania
83
Wydruki
0
Wyświetlenia
999
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Mounting option for Unifi USW Enterprise 8 PoE for a 10inch rack. May not work with all 10inch-racks since the switch is actually behind the mounting rails, that is why it also has to be 2U high. I had this model designed and printed for a long time, but my ordered 10inch rack never came, so I actually went with a 19inch variant, but I thought I'd upload this here anyway.

I removed material from some areas where it is not needed. I have not printed it with these yet, the should however not compromise functionality.

I think you can print this in PLA, just make sure to reinforce around the areas where the square nut engages (potentially use 100% infill modifier).

Additional material required:
4x M3x16mm threaded screws for the back plate
4x M8x40mm threaded screws for mounting
4x M8 square nuts for mounting

Tagi