Unifi USW Enterprise 8 PoE - 10 inch rack mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting option for Unifi USW Enterprise 8 PoE for a 10inch rack.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 84
- Makes
- 0
- Views
- 1,009
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting option for Unifi USW Enterprise 8 PoE for a 10inch rack. May not work with all 10inch-racks since the switch is actually behind the mounting rails, that is why it also has to be 2U high. I had this model designed and printed for a long time, but my ordered 10inch rack never came, so I actually went with a 19inch variant, but I thought I'd upload this here anyway.
I removed material from some areas where it is not needed. I have not printed it with these yet, the should however not compromise functionality.
I think you can print this in PLA, just make sure to reinforce around the areas where the square nut engages (potentially use 100% infill modifier).
Additional material required:
4x M3x16mm threaded screws for the back plate
4x M8x40mm threaded screws for mounting
4x M8 square nuts for mounting