1 / 1
Vaessen Motorsports VP-2 Simagic Haptics Mount — zdjęcie 1

Vaessen Motorsports VP-2 Simagic Haptics Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 3d printed mount to add Simagic haptics to the Vaessen Motorsports VP-2

Ocena
0 / 5
Polubienia
1
Pobrania
20
Wydruki
0
Wyświetlenia
396
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This 3d printed mount is an add on to the Vaessen Motorsports VP-2 to add the Simagic Haptic Reactor. It is made to be easily printable and will retrofit easily to the pedals.

 

To install this, you will need 2x M8 x 10 cap head/button head screws, 1x M8 x 25 round stud connector and 4x M4 x 10 countersunk bolts. Mount the haptic reactor to the printed mount with the m4 bolts, press the stud connector into the print, then mount onto the pedal set like shown in the picture. I would recommend loctite as it will be shaking a lot and the bolts will try to shake loose. 

 

Link to the pedal set: https://www.printables.com/model/950833-vaessen-motorsports-vp-2-diy-sim-racing-pedals

Tagi