1 / 1
Vaessen Motorsports VP-2 Simagic Haptics Mount — image 1

Vaessen Motorsports VP-2 Simagic Haptics Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a 3d printed mount to add Simagic haptics to the Vaessen Motorsports VP-2

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
396
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This 3d printed mount is an add on to the Vaessen Motorsports VP-2 to add the Simagic Haptic Reactor. It is made to be easily printable and will retrofit easily to the pedals.

 

To install this, you will need 2x M8 x 10 cap head/button head screws, 1x M8 x 25 round stud connector and 4x M4 x 10 countersunk bolts. Mount the haptic reactor to the printed mount with the m4 bolts, press the stud connector into the print, then mount onto the pedal set like shown in the picture. I would recommend loctite as it will be shaking a lot and the bolts will try to shake loose. 

 

Link to the pedal set: https://www.printables.com/model/950833-vaessen-motorsports-vp-2-diy-sim-racing-pedals

Tags