1 / 4
XT60 Housing - Supports Heavy Gauge Wire (12 AWG)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An XT60 cable housing that prints in two parts and is held on with a single screw. It can take up to 12AWG wires.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 296
- Wydruki
- 0
- Wyświetlenia
- 776
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (50)Powiązane
I noticed that the XT60 housing designs online mostly take 22-16AWG wires. I like to push my XT60s to their limit so this model is able to house to 12 AWG wires (4.5mm OD).
The two parts are held together with an M3 screw and either a M3 nut, or a 3.5mm tall, 5mm diameter brass threaded insert.
Admittedly the design of this model was heavily rushed so I am providing F3D and STEP file for your remixing pleasure.
Enjoy!