1 / 1
Distance piece for original Prusa filament holder — zdjęcie 1

Distance piece for original Prusa filament holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Distance piece for original Prusa filament holder avoiding that the Nextruder is touching filament spool in enclosure.

Ocena
5 / 5
Polubienia
7
Pobrania
38
Wydruki
2
Wyświetlenia
206
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

If the original MK4S printer is inside the original Prusa enclosure with the original Prusa filament holder the filament spool can be touched if the spool is at the outer end of the holder. This is also mentioned in the assembly manual:

Step 35 MK4S Spool installation

At normal printing the spool is not staying at the intended position and is always travelling to the outer end of the holder (also Prusament spools) when unrolling filament, which can cause a touch of Nextruder and filament spool. This part avoids that, if it is put to the outer end of the filament holder as shown in the picture.

Tagi