Adjusted cover for Vestel Wallbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjusted cover for a Vestel Wallbox based on the one carverandi created
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend of mine asked to print the model from carverandi to reduce the light the wallbox creates. After printing and attaching it, there was too much space between print and wallbox. So I fiddled a bit around and decreased the height. Additionally, he mentioned that it's hard to press the button with the original model to detach the plug (see image with the arrow). Probably not a problem any more with the new height, but better to be safe than sorry → I added a notch to the inner circle, by using a negative part. Means: not included in the stl-file, but in the 3mf.
Settings for the version in the images:
Filament:
Layer height:
0.16
Support:
yes
Infill:
10% triangles
Wall Loops:
5
Seam position:
back (re-orient the model to your needs)
Original model by carverandi: https://www.thingiverse.com/thing:5556008