LDO Voron Trident bed flex plate alignment stops
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build plate stops for LDO kit Voron Trident bed
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 243
- Wydruki
- 2
- Wyświetlenia
- 2323
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Couldn't find any build plate stops for the Voron Trident so I designed these, makes aligning the bed super easy. They are designed to work with the LDO kit beds that have the U shaped cutouts in the rear, not sure if any beds from other manufactures have these same cutouts or not.
All you need are two M3x8 screws to install. Just insert the stop between the magnet sticker and the build plate and screw in the M3x8 from under the bed. I haven't tested these long term but so far they are working great for me.
Print with ABS/ASA or similar heat resistant material at 100% infill.