1 / 2
Very lame modification of Apple Watch Dock, suitable for clone charging cables — zdjęcie 1
1 / 2

Very lame modification of Apple Watch Dock, suitable for clone charging cables

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Paul Arden's charging dock fits the original charging cables nicely; the clones are bigger; this mod takes care of this.

Ocena
0 / 5
Polubienia
4
Pobrania
38
Wydruki
0
Wyświetlenia
238
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

I have printed Paul Arden‘s Apple Watch Dock in wood filament a while ago (see make). 

Using the Woodgrain GCode post processor I altered the printing temperature for every layer. I liked this so much, I thought, I’d push it one step further and gave the print a slight sanding (240 grit) and 2 layers of oil. It turned out even nicer. While I was at it I modified the STL file to accommodate the additional mm the clone charging cables that I have received have had (8mm vs. 7mm of the original one). The clone cable now sits flush with the stand.

I have printed the dock on the picture with Laywoo-D3 through a 0.6mm nozzle on a somewhat modified UM2+. The only setting I changed in the plugin was the minimum temperature; I upped the default 190 to 200 to make sure the filament would always flow nicely.

Tagi