Qidi X-Max 3 Better cooling ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original ductwork hid the entire hot-end and Nozzle. Mine provides a clear vision of what's printing.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 669
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a cooling duct for the Qidi X-max 3 printer. It uses a standard 5015 blower fan.
I have loved this tank of a machine, quality is great, speed is great, etc… I have NEVER understood why Qidi went with the sexy exterior design of the enclosure, and then went with the minecraft blocky poop design of the plastics of the print-head. Boggles the mind. I made this with the goal of being able to actually see what is being printed while it is printing, and to open up access to the hot-end and nozzle to make quicker changes and to clean. I haven't run tests, but the ductwork appears to be more efficient at blowing equally out of each sides. I have printed many hours with it and the print quality is as good or better than it ever has been.
- My printer uses the magnetic front cover by GetFar https://www.printables.com/model/701939-qidi-x-max-3-magnetic-printhead-frontcover (Hint: If your printer has the BL Touch installed, DO NOT install the bottom right magnet to this model… It affects the functionality of the BL)
- I created a magnetic back cover that matches the one from GetFar. It can be found here: https://www.printables.com/model/1027429-magnetic-back-cover-for-qidi-x-max-3.
I used ASA for its heat resistance and speed of printing.
My parameters:
- .4mm nozzle
- Hybrid tree supports on build plate only.
- 3 walls, 3 top, 3 bottom, lightning infill at 15%, .24 layer height
- printed on Qidi X-Max 3