1 / 6
Qidi X-Max 3 Better cooling ducts — image 1
1 / 6

Qidi X-Max 3 Better cooling ducts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Original ductwork hid the entire hot-end and Nozzle. Mine provides a clear vision of what's printing.

Rating
5 / 5
Likes
16
Downloads
104
Makes
1
Views
669
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a cooling duct for the Qidi X-max 3 printer.  It uses a standard 5015 blower fan.

I have loved this tank of a machine, quality is great, speed is great, etc… I have NEVER understood why Qidi went with the sexy exterior design of the enclosure, and then went with the minecraft blocky poop design of the plastics of the print-head.  Boggles the mind.  I made this with the goal of being able to actually see what is being printed while it is printing, and to open up access to the hot-end and nozzle to make quicker changes and to clean.  I haven't run tests, but the ductwork appears to be more efficient at blowing equally out of each sides.  I have printed many hours with it and the print quality is as good or better than it ever has been.

  • My printer uses the magnetic front cover by GetFar https://www.printables.com/model/701939-qidi-x-max-3-magnetic-printhead-frontcover (Hint:  If your printer has the BL Touch installed, DO NOT install the bottom right magnet to this model… It affects the functionality of the BL)
  • I created a magnetic back cover that matches the one from GetFar. It can be found here: https://www.printables.com/model/1027429-magnetic-back-cover-for-qidi-x-max-3.

I used ASA for its heat resistance and speed of printing.

My parameters:

  • .4mm nozzle
  • Hybrid tree supports on build plate only.
  • 3 walls, 3 top, 3 bottom, lightning infill at 15%, .24 layer height 
  • printed on Qidi X-Max 3