Suspended D20
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A suspended/ stringart D20 with aligned or shifted strings
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Ever wanted a small trophy for pen and paper for the luckiest or the baddest roll or why not printing a memorial for the most epic adventure you had with your friends?
This is your chance, you can choose between aligned strings or shifted strings, both can be seen in the pictures.
The strings are very fragile, so take care when removing the print from the plate. It also may occur that single strings randomly detach while printing.
I tested both prints successfully with PLA in the latest version of creality print.
Print instructions
Layer height: 0.2
Wall generator: Arachne
Detect thin walls: enabled
Supports: none
Brim: optional (if enabled, remove with care)