Suspended D20
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A suspended/ stringart D20 with aligned or shifted strings
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 68
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Ever wanted a small trophy for pen and paper for the luckiest or the baddest roll or why not printing a memorial for the most epic adventure you had with your friends?
This is your chance, you can choose between aligned strings or shifted strings, both can be seen in the pictures.
The strings are very fragile, so take care when removing the print from the plate. It also may occur that single strings randomly detach while printing.
I tested both prints successfully with PLA in the latest version of creality print.
Print instructions
Layer height: 0.2
Wall generator: Arachne
Detect thin walls: enabled
Supports: none
Brim: optional (if enabled, remove with care)