Anime Bleach Momo Hinamori tsuba
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The tsuba of Momo Hinamori's katana from the anime Bleach.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this model because I needed a cover for Hinamori's katana for cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar anywhere else on the internet.
I recommend cutting through the center for printing and adding two or more pins for precise alignment. I personally printed it this way and the result was excellent, and no supports were needed. To prevent it from falling apart, I glued the model together with cyanoacrylate adhesive.
The model is ready for magnets to be inserted, but if you glue it to the rest of the katana, they are not necessary.
Printing parameters:
I used PET-G material, 5 perimeters, 5 top/bottom infill, 25% infill.