Liczymy pasujące modele…
2 Color Model for face-down multicolor printing + Model with color change @2.6mm for single-color printers + AMS Model with no top loop. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it.…
I created this model because I needed a cover for Hinamori's katana for cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar…
I created this model because I needed for Hinamori's cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar anywhere else on the…
I created this model because I needed a cover for Kuukaku wakizashi for cosplay. Previously I made one sword out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find…
I created this model because I needed a cover for Nell's katana for cosplay. I tried to make it out of wood, but the result was tedious and unsightly.So I decided to model a 3D model for printing. I recommend cutting through the center…
I created this model because I needed a cover for Ukitake's katana for cosplay. I tried to make it out of wood, but the result was tedious and unsightly. So I decided to model a 3D model for printing. I recommend cutting through the…
a cover i design to keep water and other things out of a comet bleach container. it does not need supports
Presenting Ichigo's Zanpakuto in all it's Shikai glory! The model is printed in multiple parts, painting is necessary on the blades (there are stencils included to help with it). ALL MANNIKS3D designs are protected by Copyright Law. When…
It holds up the middle without removing space on the track.
Anti-drip bleach bottle cap with spout, should fit most 1 or 1/2 gallon bleach bottles. I printed in PLA (maybe not bleach safe over time, we'll see). I reused the seal from the original cap (with a new hole cut in it) to prevent drips. I…
Fan de la série Bleach, j'aivais envie d'un porteclef alors j'ai fais plusieurs test pour finir avec ces 3 là. Imprimer en .16mm et peins en noir pour faire le contraste. Vous pouvez changer le filament pour le dernier millimètre.…
There is a solid print for one color. I also separated them into three pieces that can be printed different colors and then assembled. Recommend a thick print for the pegs.
2 Color Model for face-down multicolor printing + Model with color change @2.6mm for single-color printers + AMS Model with no top loop. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it.…
I created this model because I needed a cover for Hinamori's katana for cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar…
I created this model because I needed for Hinamori's cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar anywhere else on the…
Level up your cosplay with this Bleach-inspired mask! Designed for easy 3D printing, it’s split into parts so you can print and assemble it hassle-free. Perfect for fans looking to recreate the look or add a standout piece to their…
Porte-clef de l'anime Bleach Duo Ichigo-Rukia. voir mon 2e modèle avec la même image qui tourne ici. settings : single extruder layer 0.2 noze 0.4 standard quality infill 20% enble ironing (surfaçage) - optionnel, on verra juste moins les…
Voici un modèle remixé du très orginal porte-clef qui tourne de @mechanicmen_255292. L'épaisseur est maintenant de 4mm. Je déconseille moins car il me semble que le pic de rotation serait trop fragile. Mais si vous tentez , faites moi…
Lightbox sur le thème de Bleach ! Découvrez une Lightbox unique inspirée de l’univers Bleach ! Elle met en valeur une lithographie en couleur des personnage principaux . Le logo reste visible même lorsque la lumière est éteinte, apportant…
I read this article on bleach printing and came up with a design for printing onto a t-shirt or hoodie. Steps Print the design using a bleach proof filament. I like PETG Stretch the t-shirt or hoodie over a piece of stout cardboard or…
Sign inspired by the number "15" seen on Ichigo Kurosaki's room in Bleach. Perfect for door or shelf decoration. Designed based on the anime/manga with approximate dimensions of 16x15 cm. Can be 3D printed and painted for better accuracy.…
Here is the PrusaSlicer version I used on my Prusa MK4S with MMU3. You can use the recommended 3MF or STL with the manual print instructions below. Manual print instructions 100% infill Layer height: 0.08mm First layer height: 0.16mm…
This is the first model I ever made… and I don't have any tips on how to print it…. Maybe, except for one… use tree supports. They work the best for the hilt or handle wrapping. Also feel free to check my YT account where I show the…
Printed with ABS and sanded the top surface with 220 grit before applying the bleach. I used ABS because I have a spool I never get to use, but any material should be fine! Related links: Original post about bleach printing with…
Show off your love for Bleach with this keychain featuring Ichigo’s iconic Hollow Mask! You can choose between a one-sided version for a sleek, subtle look, or go all out with the two-sided design to show off the mask from every angle.…
A simple tab clamp for bleach bottle ‘tab-lock’ caps and similar. Will accommodate caps with radius 20-50mm (external tab diameter) Suitable for anyone with a weak grip or forearm strength restrictions such as MS sufferers (one in…
A basic 3d-model of the sword used by Kuchiki Rukia from the anime Bleach in its Zanpakuto form This includes both a full model and one split into 7 parts for assembly using 4mm support rods
A basic 3d-model of the sword Zangetsu used by Ichigo from the anime Bleach in its Shikai version This includes a full model of the sword as well as one split into 9 parts for assembly using 4mm support rods
Since I don't have a printer with multi-color system, I recreated the soul reaper badge from Bleach and made the eyes separate objects, that can be printed in a different color and then inserted. The fit is very tight, so if your printer…
A 3d-printable model of the left hand sword of Zangetsus version from Sennen Kessen-Hen or Thousand Year Blood War This includes a full model as well as one split into 5 parts for assembly using 4mm support rods
A 3d-printable model of the right hand sword of Zangetsus version from Sennen Kessen-Hen or Thousand Year Blood War This includes a full model as well as one split into 9 parts for assembly using 4mm support rods
This box and bracket are used to hide a geocache on bleachers where spectators sit at our local baseball field. The bracket has holes that line up with holes in the lid of the cache and tabs that mate with the metal extrusion. This allows…
This oversized "salt shaker" is designed specifically for precise application of bleach powder on fabric stains. If you've ever tried sprinkling bleach from the original packaging, you know how messy and wasteful it can be – clumps,…
Legs or kind of sawhorses to make some display shelves or bleachers for little figures or objects. You'll need some plank. It is ready for 9 cm wide planks. Use some screws or nails to fix it. There is only one of the legs because you…
Inspired from the anime Bleach, this skull hairpiece with katana stick is modeled off the mask worn by character Nelliel Tu Odelschwanck early in the series. Perfect accessory for Renne faire. Sword handle prints separately and will need…
Bleach Japan crest from Yakuza / Like a Dragon video game series. I've also started a collection where I'll be uploading new models as I create them — feel free to check it out and follow along! Yakuza Family Crests Category: Video Games
This tiered display stand functions as a desktop or dresser organizer, designed to elevate accessories like jewelry, watches, and storage jars. The stepped riser geometry maximizes vertical surface area, keeping small items tidy and…
Bleach Bottle Cap Opener This works with some UK 750ml bleach bottles. Here in the UK, Bleach bottles have a childproof cap that has to be firmly squeezed whilst turning it. The issue is that it can be hard to squeeze to cap firmly enough…
When you are done printing this can be a prop that goes in your room or something you want to set it on if you have a collection of anime stuff and if you are a organized person put this with the Bleach sets if you have them
I created this model because I needed a cover for Kuukaku wakizashi for cosplay. Previously I made one sword out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find…
I created this model because I needed a cover for Nell's katana for cosplay. I tried to make it out of wood, but the result was tedious and unsightly.So I decided to model a 3D model for printing. I recommend cutting through the center…
I created this model because I needed a cover for Ukitake's katana for cosplay. I tried to make it out of wood, but the result was tedious and unsightly. So I decided to model a 3D model for printing. I recommend cutting through the…
I created this model because I needed a katana for cosplay. I tried to make it out of wood, but the result was tedious and unsightly. So I decided to model a 3D model for printing. I recommend cutting through the center for printing and…
I created this model because I needed a wakizashi for cosplay. I tried to make it out of wood, but the result was tedious and unsightly. So I decided to model a 3D model for printing. I recommend cutting through the center for printing…
a cover i design to keep water and other things out of a comet bleach container. it does not need supports
Presenting my new and improved version for Ichigo's First Bankai, from Bleach. The model is printed in multiple parts, no painting necessary,. ALL MANNIKS3D designs are protected by Copyright Law. When you purchase, you do NOT have the…
This bleacher-style card holder was designed so that I could see all of my cards while playing Gloomhaven without taking up a bunch of table space. You should print out 3-5 of the Body pieces, then slide them into the stands. I put a 2…
Presenting Ichigo's Zanpakuto in all it's Shikai glory! The model is printed in multiple parts, painting is necessary on the blades (there are stencils included to help with it). ALL MANNIKS3D designs are protected by Copyright Law. When…
It holds up the middle without removing space on the track.
Anti-drip bleach bottle cap with spout, should fit most 1 or 1/2 gallon bleach bottles. I printed in PLA (maybe not bleach safe over time, we'll see). I reused the seal from the original cap (with a new hole cut in it) to prevent drips. I…
A friend of mine collects mini plastic ducks. He wanted a set of "bleachers" to display them on. Since he is a wood worker, I designed these to make use of popsicle sticks so that he could stain/finish the sticks to his liking and give…
Chair-sama, the ultimate being in the universe. This godly furniture is the strongest being in the tite kubo Bleach universe. Their only weakness is their desire to be reunited with table-kun.
Presenting Minazuki, The Zanpakuto of the first Kenpachi, Retsu Unohana, from Bleach The model is printed in multiple parts, no painting necessary aside from the blades (stencils Included to help paint the blood pattern). ALL MANNIKS3D…
The model is printed in multiple parts, no painting necessary aside from the blades (stencils Included to help paint the stripes). ALL MANNIKS3D designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell…
Presenting Harribel's Zanpakuto from Bleach The model is printed in multiple parts, no painting necessary. ALL MANNIKS3D designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or…
Presenting Ruri'iro Kujaku, Tte Zanpakuto of Yumichika Ayasegawa', from Bleach The model is printed in multiple parts, no painting necessary aside from the blades (stencils Included to help paint the stripes). ALL MANNIKS3D designs are…
Presenting Haguro Tonbo, The Zanpakuto of Lisa Yadomaru, from Bleach The model is printed in multiple parts, no painting necessary aside from the blades (stencils Included to help paint the stripes). ALL MANNIKS3D designs are protected by…
ORIGINAL MODEL https://makerworld.com/en/models/1219154-nirvana-bleach-hueforge#profileId-1235639 HOW TO USE: PUT THE PRINT INFRONT OF A LIGHT AND YOU'LL SEE THE COLOURED VERSION OF NIRVANA'S BLEACH COVER (this is my first model feel free…
Hi, I created a new image on Hueforge. This time, it’s Ichigo from the anime/manga Bleach . The image looks a little chaotic, but that’s pretty much what happens when he’s halfway to becoming a Hollow, so I thought it was very fitting.…
- Bleach Hollow Version , Mid Face - getsuga tenshou !!! - Use 8-3mm magnet - Compatible with prusa or nema17 Motor
Sōsuke Aizen from Bleach. Sword can be hard to print, I will upload a sword only model later for easier print. You can donate/support here : https://www.paypal.me/ludiks , thank you so much if you can do it. Category: People
Ichigo Kurosaki from Bleach. Printing it right now, will update with picture later. Check for supports twice at start. You can donate/support here : https://www.paypal.me/ludiks , thank you so much if you can do it. Category: People
A small basket on a hook to hang in the tank of your toilet to hold a bleach tablet. Shouldn't need any supports. The hooks might need a brim if you have adhesion issues. The hook is fairly snug in the basket. I added a drop of super glue…
I needed some small shelves or bleachers to display my prints, so I designed these brackets to assemble an small two-level bleachers that fited in my shelf. Obviously, the 3D printed parts are the brackets. The shelves themselves are made…
This is Bleach Ichigo's Zangetsu Sword 1:1 model, i added a whole stl, but sliced it into pieces later in the slicer. I added the slicer project file which is pre-cut so you don't have to do it yourself, enjoy the model!!!
Fake bleach bottle modelled based on a real bleach bottle so that you can mess with people by drinking water out of it in public. It's designed to fit inside an Ender 3's print volume. It doesn't have a lid, but I have shared the step…
The "cross"/pentagram used by Quincy to draw reishi out of the environment to form their bows. They are all different sizes for different individuals in the anime/manga so scale according to how big you want it (ex. Ryūken's is the size…
The cross can be printed in two part, an upper one and a bottom one, in order to have to flat side to glue together so you dont need supports (depending on settings). It can also be printed all at once
suports :no infill: cups 15% lithophane 99% tips: If you found Difficult to remove support i recommend this settings: 0.25mm z distance 75% xy distance 3mm support spacing 4 interface layers 0,2mm interface layer spacing (Hope i help a…
WORK IN PROGRESS !!! I AM ACTUALLY JUST PRINTING THIS SO CHANGES MAY COME AS I FACE PROBLEMS !!! Bleach Ichigo chain “printinplace” from entering soul society So i was rewatching Bleach and one evening i decided to do some modeling and…
My Color Order: White-Black. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down.…
My Color Order: White-Blue -Red. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back…
Well, I really need some small version to easy place my calicats. Thanks for your attention here.
Fan de la série Bleach, j'aivais envie d'un porteclef alors j'ai fais plusieurs test pour finir avec ces 3 là. Imprimer en .16mm et peins en noir pour faire le contraste. Vous pouvez changer le filament pour le dernier millimètre.…
A display stand for Fisher Price Little People. Generated with CadQuery, and I've uploaded the code so that you can easily adapt to your own Little People collection. The goal was to create “bleachers” so that all rows are visible. Rows…
Ever wonder what those symbols on your laundry tags mean? ME TOO! I had no idea... I recently remodeled my laundry room and needed to balance an empty wall with a busy wall with counters, laundry machines and the lovely 3d printable…
Remixed this Bleach lithophane to fit the caps and use LEDs https://www.printables.com/model/408134-bleach-light
There is a solid print for one color. I also separated them into three pieces that can be printed different colors and then assembled. Recommend a thick print for the pegs.
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black dark green 8 orange 12 white 17
in this print incidentally my wife put dark orange instead of light orange,otherwise is different Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black…
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black green 10 skin 21 white 23
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 12 brown 14 yellow 18 white 26
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #11 ivory white At layer #13 gray At layer #17 white
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black ivory whhite 11 light grey 12 white 23
I am a big fan of the longest running anime Bleach, and a nice little prop to make is Ichigo Kurosakis combat pass, er, secret surveillance gadget thing. I have tried my best to make this to scale to the original in the anime, and also so…
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. You can use the recommended 3MF or STL with the manual print instructions below. Thanks to the author: https://www.deviantart.com/bleachfan14/art/Ichigo-vs-Ichigo-132355764…
Clippable logo for HueForge mural holder . You can find the MMU version as 3mf and STL version. Print instructions Layers: 02mm Infill: 15% With Snug support everywhere Ironing: 15%
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. Thanks to the author: https://wall.alphacoders.com/big.php?i=1016223 Manual print instructions Print at: 100% infill Layer height: 0.08mm First layer height: 0.16mm…
Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3. Thanks to the author: https://wall.alphacoders.com/big.php?i=440427 Manual print instructions Print at: 100% infill Layer height: 0.08mm First layer height: 0.16mm Ironing:…
