1 / 1
'Anti-Social Social Club' bleach print block for T-Shirts — zdjęcie 1

'Anti-Social Social Club' bleach print block for T-Shirts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I read an article on bleach printing for T-Shirts and came up with this design.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I read this article on bleach printing and came up with a design for printing onto a t-shirt or hoodie.

Steps

  1. Print the design using a bleach proof filament. I like PETG
  2. Stretch the t-shirt or hoodie over a piece of stout cardboard or other board that will hold the material tight
  3. Spray the printed block mold with a goodly amount of bleach so that all raised surfaces are covered
  4. Place the stretched fabric on top of the bleach coated block mold and press tightly for a couple of seconds to ensure accurate transference of bleach onto fabric
  5. Quickly flip the material/board image side up and immediately begin drying (both outside and inside) to ensure the bleach doesn't creep
  6. When dried to desire let it rest for a bit to ensure it is good and dry before washing

 

Tagi