Anime Bleach Momo Hinamori vice-captain Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of Hinamori's vice-captain badge that I created.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this model because I needed for Hinamori's cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar anywhere else on the internet.
I recommend cutting fortwo parts for printing and adding two or more pins for precise alignment. I personally printed it this way and the result was excellent, and no supports were needed. To prevent it from falling apart, I glued the model together with cyanoacrylate adhesive.
Printing parameters:
I used PET-G material, 5 perimeters, 5 top/bottom infill, 25% infill.