Bleach-Inspired Hollow Mask Emblem Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A detailed, easy-to-print keychain based on the iconic Hollow mask design from the anime Bleach. Features a built-in loo
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Model Details: This is a 3D printable model of the Hollow mask symbol from Bleach. I designed it from scratch with clean geometry, ensuring the walls and details are thick enough for strong, reliable FDM printing.
Key Features:
Iconic Design: Instantly recognizable Hollow mask emblem.
Keychain Ready: Includes an integrated loop at the top for a standard keyring or jump ring.
Optimized Scale: Pre-sized to approximately 45mm wide, striking the perfect balance between detail and pocket-friendly size.
No Supports Needed: Designed to print flat on the bed, requiring no support material.
Printing Recommendations:
Material: PLA, PETG, or ABS are all suitable. PLA is perfect for beginners.
Layer Height: 0.2mm for a balance of speed and quality. For finer detail on smaller features, 0.16mm or 0.12mm can be used.
Infill: 15% to 20% (e.g., Gyroid or Grid) is sufficient for a solid keychain.
Walls/Perimeters: At least 3 walls (3 perimeters) are recommended to make the outer shell, the keyring loop, and the fine teeth details strong.
First Layer: Ensure a good first layer adhesion; a brim is optional but helpful for stability.