1 / 6
Tronxy X5SA Sailfin Volcano Direct Extruder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sailfin direct extruder on X5SA with Volcano Hotend
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Thanks to CroXY3D and Sivis for the Salfin extruder and Leo DIY for the Volcano holder.
GitHub page by CroXY3D: https://github.com/CroXY3D/Sailfin-Extruder
The remaining Salfin parts from: https://www.printables.com/model/282299-sailfin-extruderremix
With PartcoolingDistance3 you can extend an existing dual horn or adjust the position by scaling in Z. The extension is built into DualhornSailfin.
Printed with PCTG.
I also recommend my X5SA modifications: https://www.printables.com/model/772072-tronxy-x5sa-modifications