Liczymy pasujące modele…
Information Original mod M3x18 x4 for holder halterung M3x5x4 x6 heat insert nut M3x12 x4 40mm fan M3x10 x2 solo duct Mantis mod M3x18 x4 for holder halterung M3x5x4 x10 heat insert nut M3x12 x4 40mm fan Other part M3x12 x4 3010fan 6x3mm…
Modifications to the original: - part cooling duct for longer nozzle - needs 2 m3 brass inserts - modified cooling duct for E3D heatsink for better airflow and no heatcreep - relocated BL touch mount to the front - bigger channel for…
10mm spacer for CR-Touch on Ender 3 models, for volcano mods Category: 3D Printer Extruders
1x1 Multibin Top remixed to hold 16 Volcano nozzles
UPDATE : (v1-2, 1 mar 2026) added a cutout for the heater housing on the printhead pcb: BOM : 2xM2 bolt 6mm 2xM2 nut 2xM3 bolt 4 or 6mm 3xZip Tie 2mm width Description : I made this mount for easy printhead removal, allowing the…
This 3D-printed erupting volcano diorama brings molten drama to your shelf! The model is designed with separate lava insert pieces, which can be printed in red filament and slotted into the volcano's surface. Inside, there's a cavity…
This model was created specially for using with Volcano nozzles, but it works just fine with original (proprietary) sovol nozzles. NOTE! You need to extend the cable for about 30-40mm so it reaches the connector It is recommended to print…
See modification info. All credit to the original designer. My mod is completely hidden.
Differences from the original model: Added nozzle logo on the top, which you can print separately in a second color Added chamfers on the top and bottom (for looks and nice feel in the hand). Also added some smaller chamfers wherever I…
Default model (stock probe) -- the probe position remains the same as in stock ; no offset correction is required. BOM : Default model (stock probe): heatbreak fan: 1xM2 16mm bolt + printed heatbreak fan-16mm-bolt-mount model fans: 2xM3…
So, that's another storage option for your volcano nozzle. Both for regular and Ceality one.
Every mount for SV06 Plus that I've found was for the original 23.5mm nozzle. As I've switched long time ago to the shorter V6 type volcano nozzle (21mm), the Eddy probe was sitting too low. Decided to remix Chinchill's design, as it…
A terrain crater model based on a fractal design. It could be wall decor, a sci-fi prop, a terrain prop, or an artistic shelf model. There are two versions of the crater. This model was NOT created with any use of AI. It is designed to…
I adapted PP000334-rr_toolhead_vc4_front_beacon_V01_20240425 front part to accommodate Dragon Ace Volcano hot end. It allows the reuse of all other parts in the hotend, including the original metal top plate. There is a relief for both…
Wanna's Chiron Dual 5015 fan Volcano remixed for use with MGN12H linear rails. It was made to pair with the FYSETC 3D Printer All Metal E3 V6 Volcan Dragonfy adapter that was originally meant to mount the Chiron hotend to the standard…
A little comparison, the red model is the original one I printed out a year ago. I shifted the nozzles so that they were in the center of the nozzle. I made the walls thicker I made holes for thermal inserts Redesigned the planes for fans…
Bring raw elemental power to your tabletop with this highly detailed erupting volcano terrain piece. Sculpted to capture the violent energy of a mountain in full eruption, this dramatic diorama features cascading lava rivers, fractured…
I made this model to replace the original printhead. The nozzle is located exactly in the same place as in the original printhead, so there is no loss of print area along any of the axes. The mounting of the original Z offset sensor is…
I seemed to have a unique situation already with my railcore setup somehow. I could never find a model for a fan shroud that fit the mounting hole spacing so it required modification or just brute force to fit properly. When I upgraded to…
I needed a fan duct to use with my BLTouch unit and Volcano-style hotend unit. There wasn't one, so I found the closest one I could and added compatibility for a BLTouch mount (I think). I'll modify this later if it doesn't end up working…
I extended the original one from the thingyverse by 7mm to account for the Volcano nozzle height difference. The XY offset stays the same at: x_offset: -51.2 y_offset: -1.51 I also added a modified version of the Original BTT provided one…
Anycubic I3 mega S Spacers for e3d V6 Volcano whitout threaded hole for bowden
This is an original design for a 2 color presence token for the Spirit Island spirit Volcano Looming High . Together with the reminder tokens , you can print a set of 13 presence token, 3 defend tokens, and 3 isolate tokens as pictured.…
A clip so you can hang up your hose after using your storz and bickel Volcano Hybrid Vaporizer. Print upright, 10+% infill. Colour and filament of your choice
A planter for small succulents (the hole is about 59mm diameter and depth) with drainage, detachable lava and an optional inner pot. The inner pot allows to extract the plant and replace the lava later. No multi-color printer required, no…
Print upside down. So that the funnel is at the bottom and the thread is at the top. no supports necessary.
This is a modification to the nice DragonBurner v8 toolhead to accomodate the NF Crazy Volcano Hot End. Just the affected parts were posted, and you should download another parts from the original source. You will loose 2mm on Z travel…
Put on your bubble thing in your fish tank for a fun erupting scene!
Universal adapter to fix adxl direct to the heat block of volcano hotend. Print it with 0.2 layer height and 3+ walls without supports. Object is already oriented. I print it with pla for testing but is best printend in petg (more elastic).
Just adjusted the height for volcano in fusion 360 (im a total noob at it, so its not perfect).
Overview This remix of the EVA 3 Beacon Probe UHF Volcano Ducts is designed to be compatible with the latest Beacon3D Rev H, a high-performance 3D printer component that enhances precision and efficiency in the printing process. By…
I needed the stealthburner to fit volcano size nozzle and filametrix.
Lowered Fan Mount Remix. Fan and duct are lowered by 8mm in order to blow closer to the part in a volcano style assembly
Printhead shell for Elegoo neptune 3 pro (mb others if fits) with volcano hotend and 5015 fans.
extra m3 nut and 4 or 6mm bolt are required. sensor position stays the same, no probe offset correction is required first version will fit better but it requires supports – see attached screenshots on how to place them
The game file for the volcano market sign, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the volcano, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
"KISS" housing/holder for E3D V6 (normal) and Volcano. The design is based on the stock housing, still making use of the stock mount metal piece. It can be printed without supports - bottom side up. The construction is light to keep the…
Fan duct for the longer V6 Volcano Hotend that fits on the stock effector of the Anycubic Kossel Plus. Very simple design with minimal airflow restriction. I am using it with a clone hotend, so tolerances might vary a bit, also depending…
This is a remix of BENgineering's sherpa mount for the FLSun Q5. This could probably be adapted to the QQS or SR fairly easily Note: this mount/probe combo is not suited to run the actual delta calibration due to the offset (x_offset: 1.1…
Thanks to CroXY3D and Sivis for the Salfin extruder and Leo DIY for the Volcano holder. GitHub page by CroXY3D: https://github.com/CroXY3D/Sailfin-Extruder The remaining Salfin parts from:…
This is a Hemera upgrade set of parts for an ender 3 X carriage with a cable chain mount. It is designed around my Anycubic Chiron where the X Carriage was not made correctly and therefore could not be tightened onto the extrusion. This…
Давно уже думал о том, чтобы установить вулкан на Reborn 2. Наконец-то я это сделал. Только учтите, что под пластинки, которые размыкают концевики по оси Z, необходимо установить проставки! Проставки:…
Проставки для флажков концевиков чтобы установить нагревательный блок от Volcano наReborn 2. Так-же рекомендую установить хороший обдув: https://www.printables.com/model/1033537-reborn-2-volcano-mod
18mm Cpap and no bus cable holder 40mm fan shroud
Information Original mod M3x18 x4 for holder halterung M3x5x4 x6 heat insert nut M3x12 x4 40mm fan M3x10 x2 solo duct Mantis mod M3x18 x4 for holder halterung M3x5x4 x10 heat insert nut M3x12 x4 40mm fan Other part M3x12 x4 3010fan 6x3mm…
Maybe because it's just been released, I couldn't find the released cad file at all I couldn't even get a detailed size drawing I bought it myself and measured it with calipers as accurately as possible It may not be very accurate 🥲 The…
This volcano-shaped vase features the popular Voronoi pattern, giving it a geometric and modern look. It’s perfect for home decoration or as an artistic piece. The design requires supports to preserve the details during printing. PLA or…
BMG DIRECT V6 VOLCANO for Creality system 1 generation - heatsink type V6 - bmg extruder - 3 axial fans (two in series for layer ventilation, 12v) - volcano heater block Advantages and characteristics - increased air flow on the heatsink…
Voronoi-style vase with a volcano shape and twisted design, perfect for decoration.
This is a remix of 794832-fanduct-tronxy-x5sa-pro. I modified it to fit with a volcano heat block. And works good!
How it works Close the volcano and place the ground piece on top. At the back of the volcano, there’s a slot for a 9mm silicone tube. Connect this tube to a syringe filled with vinegar. Add some baking soda and a few drops of food…
It's an old concept, but in use with CHT nozzles, you can print (without improve cooling, fan shroud) up to 40% faster. But this needs a lot of experimenting and tuning. But it's feasable with this mod. Further explanations found here:…
Upgrading the Modix Big 60 to a E3D Supervolcano hotend allows the printer to print faster and with a layer height of 1MM, and a max nozzle diameter of 1.4mm. However i needed to create a couple of files to make this mod happen. A spacer…
I made this mount to adapt a Dragon style hotend to my SV08. I used a CHCB type heater, but a CHC tube style also works. The Stock hotend uses proprietary parts and in my experience is prone to heat-creep. This mount has a separate block…
Upgraded adapter for installing BTT-Eddy on Neptune 3 Pro with Volcano Hotend. I have a blower installed https://www.printables.com/model/661651-neptune-3-pro-volcano-hotend and it doesn't conflict with this. Eddy Adpater : x=-41.58 y=26.48
CR Touch space with a watermark to cover nasty cables on the side with your own brand-- fusion project file included
Haven't thoroughly tested yet, but it fits for the most part. It's just difficult to print and assemble.
Remix of 2 parts in the https://www.thingiverse.com/thing:4329200 to allow it to mount a Bondtech LGX lite extruder. Need to change the lower M3 screw of the Bondtech LGX lite with a longer 30mm one. Also uses a M3 screw instead of a M2…
mouthpiece for volcano vape Volcano Easy vaporizer Mouthpiece
Shroud modified from several of the 5015 Shroud mods by Maxim.
The Volcano Vase is a bold and dramatic centerpiece inspired by the raw power and elegance of volcanic landscapes. Its sleek black finish and unique open design evoke the flow of molten lava, creating a striking visual impact. Ideal for…
This fan duct can be used with the mounts created by Paul for SKGo. They are located here https://github.com/TheBasicMind/3DPrintParts/tree/master/Hermera%20Mount Note: These mounts were designed for 3mm aluminum, but I had to cut them…
I purchased a Klicky-PCB for use on my Voxelab Aquila and saw Kevinakasam's KlackEnder-Probe afterwards. I liked the idea of the main probing mount attaching to the belt connectors of the stock Ender3 carriage. I remodeled the mount to be…
Vulcano Release Trigger from Playmobil set “Triceratops with Baby” I printed this model standing on on the side with organic supports. Vulkan Auslöser für Playmobil Set “Triceratops mit Baby und Vulkan” Ich habe das Modell mit organischen…
J'ai créé cette pièce pour ma Tenlog TL3D , j'ai ajouter une tête de chauffe plus longue. Cette modification permet d'extruder plus rapidement grâce à la longueur accrue du corps de chauffe, et pour au final imprimer plus vite. C'est…
A while ago, my son saw a toy volcano in an advertising brochure and I thought: we can do that too, but better. So here it is: a volcano to put on your wooden train tracks, it even fits on a 180x180 printer (though you have to sink it in…
This is v2 with fixed tolerances. A simple case that can hold 30 volcano nozzles.
Remixed mount to have camera lower
I designed this to hold all of the original parts with the E3D Volcano. You will need a separate mount like the one below. I know we could 3D print one, but I wanted a metal mount and ordered…
I cut 2 half of model from Original filament cutter and v6 volcano mods
Do you have a favorite BL Touch mount, but it doesn't work because it was designed for a standard tip, but you have a volcano tip? This extension will space the BL Touch down by 9 mm and is the same profile as the BL Touch, so it should…
The original elegoo neptune 3 extruder has been rescaled and adapted for volcano parts. Based on the original CAD file from Elegoo.
The fan shroud was made 1.8 and 3mm longer because with the Volcano nozzle mod (https://www.printables.com/model/656891-qidi-x-max-3-volcano-nozzle-adapter), some prints with high cooling failed with the error “the temperature of the…
Contains an opening for a hose / air stone as well as openings on the bottom for weights
Volcano Grill for HiFiMan HE-500, HE6 etc. for more open sound stage. Does fit the original retention ring without issues. Prints without supports.
Print exactly as directed in the Dragon Burner repo!
Make the adapter any size you need it. Straight attachments, Tapered attachments ... heck I think you could even print it to be an entire downstem attachment for a billy if you're that way inclined. I used ABS but probably better to use…
Credit to the original designer, I removed the rounded exterior edge to allow for easier flat bottom printing, and extended the duct by 8mm in the Z axis to fit a volcano nozzle. Step file included, should work with most slicers without…
Convert Sapphire plus to E3d Volcano with minimal Z height loss (about 2mm). Notes and requirements. Will need various M3 inserts and screws (mostly 8mm). Designed for Dual 50-15 blowers and one 30mm heat-sync fan Designed with zero…
This is a little Nozzle box i created to go in the Drawers of my Toolbox. It holds up to 30 Nozzles (V6 or Volcano)
Fusion 360 model of the E3D Volcano nozzle. Every material (hardened steel, brass, etc.) has the same geometry, so this model should apply to all of them. Category: 3D Printer Extruders
This is a remix of the Voron Afterburner Warbird v2 by Daniel_25088 , designed to incorporate dual side-mounted 4010 turbo fans instead of the stock 2040 blower fan , improving cooling performance and reducing bulk. The top 4010 fan has…
edited Mahon2486's design so that the duct could work on my chc pro, i also angled the fan as it collided with my x axis tensioner, the fan should still be able to be press fit only supports needed are for the final part of the arm where…
New version here: https://www.printables.com/model/1375025-biqu-microprobe-v2-ender-3-pro-volcano-mount-v2-ch Mount for the biqu microprobe V2 (should be the same for the V1) for the ender3pro (and other printers with the same cover) with…
I designed this container to hold the original sizes for the E3D volcano nozzles. It has a model of each nozzle at the head of each row so that you can identify a given nozzle and store it. Four rows are provided at each size to allow for…
You can also check this model for Volcano hotend (3x5015): https://www.printables.com/model/1294309-neptune-4-35015-printhead-volkano
Volcano Design to go with the classic chemistry experiment- the inside is slightly larger than the opening to give slight resistance to the foam escaping. the sides are sculpted to have three deep lava “flows” for a cool visual effect. We…
I made this because I wanted to challenge myself to do it in fusion. Specifically it's designed to clear the Ender 3 Neo's hotend heatsink and also accommodate a standard ender 3 BL-Touch mount. The design is not a copy or inspired by…
Supports: yes use brim if bed has low adhesion I do suggest printing in a strong material such as petg or abs
