Volcano for Science experiment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a volcano model for use as a science experiment using Baking soda and vinegar with dishwashing soap, food color.
- Ocena
- 5 / 5
- Polubienia
- 102
- Pobrania
- 1347
- Wydruki
- 5
- Wyświetlenia
- 5540
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Volcano with base for the Vinegar and Baking soda and dish soap experiment, I have included holes for TPU printable feet and Plug for the bottom (10-15% infill, recommend raft for TPU feet) . For the volcano, I printed it on the Bambu Lab X1 with AMS unit 15% infill in chocolate and Bone white PLA, If so equipped, you could use blue for sea effect. (I would use paintable supports for foot-holes in model only, supports not needed for Volcano model) I have remixed a funnel model from Boogie to be right size to add vinegar/dish soap/food dye to your Baking Soda (PLA with 20% infill for funnel).
Ingredients
— 2 Tablespoons baking soda
— Half a cup of Vinegar
— Few drops of dishwashing liquid
— Few drops of food coloring
Directions for experiment
- Have all the parts printed and ready. (with feet already assembled onto base)
- Do the experiment over a sink or an easy to clean area is recommended.
- Turn the volcano over while plugging the top hole with finger over a trash bin, have an assistant add the baking soda and plug the bottom with the bottom plug.
- Turn the volcano over and put into position easily cleaned.
- Mix vinegar, dish soap and food dye in small container.
- position funnel over top hole.
- Quickly pour Vinegar mixture into Volcano.
- Back away and enjoy the show.
- When eruption is completed, remove plug in sink and wash out with water to reset.