Liczymy pasujące modele…
This design is an experiment both in CAD and in printing the CAD design (see below for more information on the special printing configuration). I plan to use this design (or possibly a variation of it) on a future print I am planning, but…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
The Hovering Disk is a 3d printed device, which demonstrates almost frictionless motion. The air coming from the balloon is moving through a small whole to the bottom of the disk. At the bottom it is distributed all-over to all sides.…
For me, a very good slicer profile (PrusaSlicer) for Anycubic Kobra series printers (2/2 Pro/Neo, etc.). Still undergoing my testing, but I already rate it as very good. Please ensure proper bed height and dimensions to avoid…
Basically a public beta of "Super BCAR" testing models I throw together on a whim Apparently the Akasha BCAR works really good. Whether it's the enormous porting, the inline PCAR, progressive crush, or all of the above, I've no idea. May…
experimental 8" speaker surround that has been printed in TPU, and is being tested for durability right now. Category: Audio
Introducing my pool hoover! after a few failed attempts to get a 3d printed pool hoover to work i stripped it down to a basic design… mainly to test it but found it works really quite well so i have left it as it is. the basic design…
An experiment in printing my own 608 bearings. I've included everything so far, and haven't quite gotten my cheap 3D printers to print this yet. Although that is a limitation on my Tina 2 3d printer. The print settings I've changed so far…
The model was built around a laser pointer that is 17mm in diameter and 113 mm in length. I have printed and tested the model and it works.
These are a few stands for lenses, mirrors, LEDs and cards to help children play around with optical properties by freely moving them around seeing what they can do. Great for also calculating focal length of your 25 and 27mm lenses.…
The two basic models are uploaded + a track for a hot-wheel and a huge ball track
this is an experimental coupling for nem-fitted railway models. the idea was inspired by the sprat and winkle system. using small weights to hold a hook up and pulled down with magnets under the track. this is meant to be hands-free. it…
A set of tools for cutting out agar cubes at approximate sizes. Includes “cork borers” but in square shape (SCAD/3mf file), and a chopping board(STEP file) with predefined slit locations for cutting. For the cork borers, set to vase mode…
This model is a flame elemental warrior holding a hammer, designed as a dynamic display piece. It is the third model created using an experimental 3D workflow: prompt creation with ChatGPT, image generation with Sora, conversion to a 3D…
I made it with a Ball generator that I am working on uploading soon. I will post updates on: https://www.youtube.com/@randotechnerd or you can hop in the discord if you want to chat: https://discord.gg/8fjQHDX8PQ or email me…
My latest airplane fixation is on Barnaby Wainfan's underdevelopment FMX-7 BatRay. It is a two seat, tube-and-fabric construction, low aspect ratio aircraft and a progression on the ideas pioneered in his one seat facetmobile that first…
Yes, I know there's a cool library (Belfry OpenScad Library, v2) to achieve all sorts of mechanical parts, but sometimes someone wants to tinker around for themselves. The best working screws with my experiments are the ones with two…
An attemp to create something useful (rather than decorative objects and toys) with UV color-changing filament. The design is meant to be partially printed with regular plastic that matches the “shade color" of the color-changing…
This is a rough prototype build for an Elvish Flitter as described in the Spelljammer setting produced by TSR and owned by Wizards of the Coast. I don't claim any rights to anything D&D or Spelljammer related, this is a pure fan design…
Here are some experiments and requests for cygnus keyboard. Cygnus top halve with a single 1.5u thumb key.
For additional resources, such as instruction sheets (in German), see our GitHub repository . The models provided here form the basis of an experimentation kit that teachers can print in order to allow their students to perform…
A carrier deck for https://www.printables.com/model/878813-small-sinkable-battleship/files Not tested, will update when I have.
Disclosure: Although the license for the 270 hinge adapter is restricted I have received permission from @Diablo_1609422 to remix it, which is located here K1C Adapters for use with V2 and V3 270 degree hinges . The license is why it…
Demon Core Experiment, I designed based off pictures, so assuming not to any sort of scale. name plate is designed as second part so you can do a manual color change The “Core” is a 3" Inch Chrome Steel Bearing Ball i got from amazon…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
If you like what I do here, come visit my (German) Facebook group. 3D printed Grow Tools & Accesories - free .stl changelog: v1.1 - changed diameter, so it can be scaled up to 133% for a 8mm version and still fits on mk4s - added a…
New race body for Experimental Chassis of RUDE. Version 1.0 Chassis attached as reference. Can be printed both standing without supports and laying flat with supports enabled. If you would like to support me - you can buy me a coffee :)…
These models and experiment sets are featured in this YouTube video: You will need the latest version of OrcaSlicer. As of 11/15/2025, you will have to do this: 1. Go here: https://www.orcaslicer.com/download/ 2. Download the nightly…
Watertrap cylinder with 18,5mm diameter that is connected with a 10,0mm (inside diameter) hose to the blowpipe.
So the s400 uses some of the space between the foregrip and trigger as additional spring space. That could mean more potential draw when translated to a Lynx. Only problem is that it completely breaks the trigger linkage, and I'm not keen…
The model was built around a laser pointer that is 17mm in diameter and 113 mm in length. I have printed and tested the model and it works.
Ersatzdrehknopf für die KOSMOS Elektronik-Experimentierkästen. Variante1 zum Aufstecken auf die Potentiometer Variante2 mit Loch zum Verschrauben für den Drehkondensator Gedruckt in PRUSAMENT PLA grau
Basically a public beta of "Super BCAR" testing models I throw together on a whim Apparently the Akasha BCAR works really good. Whether it's the enormous porting, the inline PCAR, progressive crush, or all of the above, I've no idea. May…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl EXPERIMENTAL !!! mounting solution for activated carbon filters of every size…
Stratoflights Halterung für Experimente. Halterung an den Holzstab stecken.
For additional resources, such as instruction sheets (in German), see our GitHub repository . The models provided here form the basis of an experimentation kit that teachers can print in order to allow their students to perform…
🏁 Experimental Parametric TPU Tire Inserts – The Future of RC Traction Tired of foam inserts getting soaked, rotting, or developing flat spots? This experimental project brings a 3D-printed solution for the entire RC community. Whether…
The model is a part of the LMU-Klimakoffer (CC-BY-NC-SA 4.0) for the activity 'Tipping Points'. Link: https://klimawandel-schule.de/de/der-lmu-klimakoffer Print: 4 rods 16 nuts 2 sidewalls For better reading of the numbers, you can do a…
Heres an obscure one for ya, this is HIBEX, an INCREDIBLY fast missile used to intercept incoming warheads from soviet ballistic missiles at the last minute. For this reason it had to be faster than fast. It could withstand accelerations…
update 6/1/2026 - the more rigid ab mounts seemed to have resolved the x beam racking, however... unfortunately when i had first caded this up, i made some of the holes on the o.g motor and front mounts a little oversized. initially this…
This design of PIP Swivel allows limited rotational movement between two parts of a 3D printed model. It consists of circular disk and shaft that is free to rotate in the fixed part, and constrains the movable part to rotate around the…
For details, please refer to our project website .
A carrier deck for https://www.printables.com/model/878813-small-sinkable-battleship/files Not tested, will update when I have.
Experiment in trying to make a fidget spinner without bearings. Printed in 100% infill with a couple drops of oil* in the pivot joints, it should spin for 15-20 seconds fairly easily, but I haven't gotten it to go over 30 seconds. It…
Your Colors, Your Heart: The Multicolor Experiment :-) Project Description: This set of three different hearts was born from an experiment with multicolor 3D printing . Each heart features a unique geometric pattern designed to showcase…
My latest airplane fixation is on Barnaby Wainfan's underdevelopment FMX-7 BatRay. It is a two seat, tube-and-fabric construction, low aspect ratio aircraft and a progression on the ideas pioneered in his one seat facetmobile that first…
If you like this project, feel free to join my Discord. That is where the Canna-Cup 2026 takes place, where we compare results, share experiences, and continue improving projects like this together. Discord: MX-creations (German+EN)…
komik olur diye yapmıştım ama gerçekten çalışıyor. saç tıraş ederken saçların etrafa dökülmesini önemli seviyede azaltıyor. aşırı deneysel olduğu için öneremem ama belki geliştirilebilir.
Modification for this project: to make it a 12h clock. Marked as "Experimental" since i haven't tested it yet.
You can use a plumb line to determine the position of the model's center of gravity.
This is an experimental adapter that I made up to allow the Mini-14 to use AR-15-type grips. It would be best printed in metal or CNC machined from metal, as I do not think plastic would withstand the recoil. Note: The holes must be…
It is still experimental! For now, please only print it if you own a 3D printer. I'd be happy about feedback. This is a switch puller for Kailh Choc V1 (PG1350) Switches. It will only work with switches in a plate. Layer height doesn't…
A set of tools for cutting out agar cubes at approximate sizes. Includes “cork borers” but in square shape (SCAD/3mf file), and a chopping board(STEP file) with predefined slit locations for cutting. For the cork borers, set to vase mode…
Upper holes are bored with Hümmelchen proportions to show if semitones are still possible on this chanter length. Some corrections in spacement are done but it based still on the bass chanter of the Sordellina in F. Sordellina Bass Reed…
Started as an experiment to see if I could create some new shapes. Starfighter not related to any particular franchise. Category: 3D Printing
01.06.25: Maybe the same problem as the Flute in D that the whole scale/ fingerhole spacement ist one note to low. 03.06.26: Model is no longer available.
04.02.25: Part 3 & 4 are now added without the finger grooves. 16.02.25: Part 2 with new Windway design is added. 14.04.25: The windway on the alternating part is now a bit less deep for a lower need of air, the holes 5# and 6# are quite…
I will add more info as I tinker with this.
Contrabass Drone Flute in F inspired by the work of Miguel Medina and based on the parameters from https://www.flutopedia.com/ First hole of the lower hand is turned backward because the finger spacing. 16.02.25: Part 2 with a improved…
Silicone ring, rubber band, cork or teflon foil must be added on the tuning slide.
High E Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
High Eb Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
High C Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
Bb Whistle based ont the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
With hole for the pinkie (D) and bottom note B to play minor tunes.
Hueforge filament painting (4 colors) of an abstract sketch, imagining a human experiment several centuries ago. The photo shows an actual print of the model (scaled down to 130x130mm). I like the more cartoon-ish look when printed with…
List of materials BMG set Idler arm from a sherpa mini M3 inserts with an diameter of 4.1mm (Mellow brass inserts were used) Notes: chop down the heatsink for those measurements
Ever wanted to be different? Ever wanted to stand out from the rest? Well then this phone stand is for you! This phone stand is meant to save filament, and be cheap to print. WARNING Like most thin plastic things, this thing FLEXES. Even…
Based on the Low Tech whistle with fipple design similar to the Carbony Whistle
Alot A Whsitle based on the Low Tech Whistle measurements. Fipple design similar to the Carbony Whistle.
Disclosure: Although the license for the 270 hinge adapter is restricted I have received permission from @Diablo_1609422 to remix it, which is located here K1C Adapters for use with V2 and V3 270 degree hinges . The license is why it…
This glass cuvette holder was designed to be used for a set of glass cuvettes of different path lengths (d), namely 1 mm, 2 mm, 5 mm, 10 mm, 20 mm, 50 mm and 100 mm. This set is used in our laboratory to perform dilution experiments in a…
Reed tongues should made out of carbonfiber but can maybe work out of other materials, too. Elderberry wood (traditional), spindle tree, cane, fiberglass or plastic are possible.…
An exercise in minimum effort for maximum effect. This method just needs two color swaps and a 0.2mm tall (thinner if you dare) modifier slab that removes just the first bottom layer of the print, leaving only the infill and the…
Lot to print here but fun project. The gun you can glue together and designed it so you can add 5mm LEDs. Used stitch from another STL and cropped the head. Great design, I just added his antennas. Category: 3D Printing
A Lizard Experiment. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
I did another experiment with TPU/PLA Multi-Material printing. I changed the interface section in a way that over a configurable number of layers the 2 materials get kind of "woven" (per layer) to each other (see pic of interface…
Free reconstruction that I made after research about Henry Starck and his legendary bagpipes. Chanter in the key of E (lowest note D). Fingering like a Tin Whistle or Irish Flute/modern Flute. Drones in Bass E, Baritone B, Tenor e. Long…
Demon Core Experiment, I designed based off pictures, so assuming not to any sort of scale. name plate is designed as second part so you can do a manual color change The “Core” is a 3" Inch Chrome Steel Bearing Ball i got from amazon…
This project allows you to have a educational introduction to the Moment of Inertia. The presented rolling cylinder has two chambers with equal volume. Having two cylinders: one filled the inner, the other filled the outer chamber, gives…
Don't you love it? Magnetism? Electronics? And 3d printing? In this project I combine all of them together to a little but spectacular do-it-yourself experiment. With just a few components and the 3d printed part you will be able to build…
Conclusion A whole day wasted. This does not work, I feel foolish even going this far to test, we know perpetual motion cannot exist, yet I still tried. The “evidence” posted on YouTube suggesting it does is faked. It probably runs a…
This is an experimental open-frame PC case built using old PC parts. It's a fun and challenging project for anyone who enjoys tinkering with hardware. The open-frame design allows easy access and customization while creating a unique and…
Literally the experimental ocarina but with a lanyard strap so you don't drop it in a pile of snow and lose it until your brother finds it in the grass near the pile of snow after the snow melts
This is a complete box replacement for Pandemic: The Cure with or without the Experimental Meds expansion. Everything has been sized to get to as small a footprint as possible. This box is easy to pack for vacation or game night and…
Here is a travel box for Pandemic: The Cure. We took The Cure and Splendor on our family vacation to Seattle last year, and while I had a nice 3d printed box for Splendor, we just relied on the bag for The Cure. Since then I've been…
This model is more for idea than for practical usage. It worked to some degree, but it definitely requires modifications.
1/6 of total size taper with 1:33 and the rest of chanter with a 1:26 taper. Throat 4,7mm. Sound volume should be similar to a Borderpipes in A = 95-100 decibel. Should sound similar to this one:…
This is an experimental version of my Ender 5 ModMax v02 design that adds AWD (4 steppers for XY movement). These parts are incomplete and not fully functional yet. I'm posting them to share with interested people, show my progress, and…
Archetype toolhead ( Experimental Branch ) for Ender belt path. Requires MGN9 rail on the X gantry, see this for a no rails version Updated version of this, for the Archetype Experimental branch . Belt mount & belt mount end: updated belt…
Parts Intended for Archetype Experimental Branch bltouch_mount_medium: Uses the 2510 fan screws to also securely mount the fan cover, which the bltouch bolts to. Extra Bom: 2x Heatsets 2x M3x6 BHCS (mounting the bltouch) Probe Offset: X =…
Archetype Experimental Branch core mounting block that accepts a Dragonfly BMS. Hotend sits at Short duct height by default, add 8.5mm MZE to reach Medium or Large. Extra BOM: 2x M3 Heatset 2x M3 Bolt (These should have come with the…
This is an experimental model for a headrest mount that uses the small AbleNet Candy Corn switch. It hasn't been tested yet, and there are likely issues with it. I don't recommend using it until it is finalized.
I have not printed this part yet - I'll update this description when I do. Use with caution. Print four each. Recommended print settings: Material: PETG Layer Height: 0.30 mm or less Infill % : 15+ Supports: Yes Support Type: Any Print…
With the Prusa CORE One they introduced a new way of guiding the cables and filament to the extruder, something they call the SwingArm. I've remixed the design to make it compatible with the K1/K1C, when using this Lid Riser . Any other…
This is what happens if you 3D print Benchy, then 3D scan it, then 3D print that scan, and so on... 10 times. More info in this video:
The idea behind this dart cup is to keep the dart more horizontal as it accelerates out for the gun. Normally, the dart tips toward one side, with the head rubbing the inside of the barrel on the way out. This should keep the dart…
![[Experimental] Kailh Choc V1 Switch Puller](https://media.printables.com/media/prints/222949/images/2038495_66998148-ec2b-405b-a55c-6b11be07f2b3/dsc07159.jpg)
![[EXPERIMENTAL] Headrest Mount for Small Candy Corn Switch](https://media.printables.com/media/prints/1188557/images/8935877_bad6bf69-7586-4c0e-b69a-0af861b0ea45_d2a5143a-f0ce-473f-b454-9709ca39a6c2/candy_corn_headrest.png)
