Infill as an Inlay Experiment (with example tables)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's not kumiko, so is it kumifaux or fauxmiko? 🍅
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
An exercise in minimum effort for maximum effect. This method just needs two color swaps and a 0.2mm tall (thinner if you dare) modifier slab that removes just the first bottom layer of the print, leaving only the infill and the perimeter. The second layer still largely comes into direct contact with the build plate, leaving a smooth surface without the need for a "true" multi-material print.
The table design was inspired by this Pask Makes video but i've been thinking about using infill patterns as a kind of wannabe kumiko for a bit now (see my previous model with a similar idea). Using black for the first layer gives it an epoxy-filled vibe (without the sanding!), but a metallic silk filament could simulate brass, or you could use two different colors of “wood.”
Be sure to try different infill types and percentages. Please experiment and share your results!