1 / 13
BiQu H2 (V2,V2S) fanduct for single / dual 5015 Fan - standart / volcano heatblock
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BiQu H2 (V2,V2S) serie fanduct for single / dual 5015 Fan and - standart / volcano heatblock
- Ocena
- 5 / 5
- Polubienia
- 124
- Pobrania
- 1488
- Wydruki
- 9
- Wyświetlenia
- 5953
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 9) (Komentarze: 27)Remiksy (1)Kolekcje (149)Powiązane
BiQu H2 fanduct for a single 5015 fan
Parts Needed:
- 2x M2.5 x 6 countersunk screws
- 2x M3 Nuts
- 2x M3 x 24 screws
Printsettings:
- Layerhight: < 0.15mm
- Support Needed
BiQu H2 fanduct for a Dual 5015 fan
Parts Needed:
- 2x M2.5 x 6 countersunk screws
- 2x M3 Nuts
- 2x M3 x 20 screws
- 2x M3 x 24 screws
Printsettings:
- Layerhight: < 0.15mm
- Support Needed
Recommended printing in ASA/ABS or other temperature resistant filaments like PC
Assembly tips:
- Mount the fanduct to the H2 with the M2.5x6 countersunk screws
- Mount the fans to the duct with the M3x20 and M3x24 screws and M3 nuts
Testprints:
The BENCHY was printed with eSUN Silk PLA in 40 min @
- FanSpeed: 100%
- Layer High: 0,2
The Overhang test was printed with eSUN PLA+ in 18min @ FanSpeed 100%.
- FanSpeed: 100%
- Layer High: 0,15