Liczymy pasujące modele…
Support my work +++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The bridges are now 40mm instead of 140mm which was never a problem for my Prusa i3 or MK4. I normally print them with PETG (Cloud Keys can get very hot) in 0.3 draft mode with 15% InFill and never had any problems.
Wydruk około 2,75 €–3,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option which i used before and be able to replace my empty right side. There are more options out there to combine it to. Use 2 M3 inserts and 2 M3 screws to…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parametric model for mounting the Unifi G4 Doorbell Pro at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. Rendered a couple of versions as STL,…
An unofficial wall mount for the Ubiquiti Unifi Cloud Gateway Ultra. It can be either screwed in place with two M4 screws or attached with a double-sided tape. It works for the UCG-Ultra | UCG-Max | UXG-Max. I've also shared the .step…
This is the all new Vortex System to mount the Biqu H2 V2 extruder on the Sovol SV01 PRO, OG SV01 & SV03! Equipped with twin spiralling air ducts for powerful effective airflow directly to the area below the nozzle! . EDIT: Now with V2…
A 19" rackmount for the Ubiquiti UCG-Ultra. Parts held together with screw and nut, no glue required Ignore my poor print quality. Right side appears to be slightly taller than the left in my photos (it was - my cock-up) fixed in the…
UPDATE: after inquiries have i made one that is 5 mm high, for more airflow Wall Mount for ubiquiti unifi Cloud Key Gen2 Plus Print one of each. 5mm hole for screw Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
UPDATE: After a year of use I noticed PLA was not holding up and where the two parts meet it started to sag. You might want to print this in non-PLA or support it with a plain metal rack. Two-piece design that slide locks together (no…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
Crude Remix to be able to print it in one go on bigger printers. At least a 370x370mm printbed is required. Dont mind the blocks in the preview, they are negatives volumes and will not be printed. Load the project as “Only import…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra. Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. I included another model “key” that can be…
Created from scratch to allow me to make my own rack mount. I wanted to leave gaps for the vent holes and potentially the storage bay too. I've taken all the measurements myself on a UCG-Max and while I've made every effort to get them…
Ceiling mount compatible with most of the Ubiquiti access points. Print instructions In addition to the printed parts you will also need: 1x M6 screw (to attach the mount to the ceiling) 3-4x M3 screws with nuts (to attach the mount to…
There are three supplied mounts. A front version for typical shelf mounting and another that allows inverted mounting which might be useful on a wall or under a shelf. The difference is the location of the window that allows a view of the…
Note: this antenna has not been tested or optimized. The design is a WIP. None of the photos included are actually from this design as I haven't built it yet. However, the photos should be close enough to give you an idea of how things go…
Engelsk: Mount for Ubiquiti Cloud Gateway Ultra (Unifi UCG Ultra) This mount is specifically designed to securely hold your Ubiquiti Cloud Gateway Ultra (also known as the Unifi UCG Ultra) in a practical and efficient way. With this…
…Please at least be sure to hit like & post a make, I'd love to see your prints! EDIT: Updated X belt adjuster block & slider models! Big improvement. EDIT: Now with V2 Ducts!! Here is the new Vortex V2 Linear Rail X system for the Sovol…
Inspired by vampyrex13 's BIQU H2 ABL mounts (https://www.thingiverse.com/thing:4893522).
Wall mount bracket for Ubiquity Cloud Gateway Ultra. Gateway snaps into base and is held very tight. Printed on MK4 Layer Height: .20 4 Perimeters 15% or 20% infill (grid). I tested successfully with 15% infill. No supports needed Suggest…
This is a rackmount adapter for Ubiquiti Cloud Key Gen2 Plus. The rackmount adapter is printed in four parts: Cloud Key carriage mount (left mount) Cloud Key rear hook Middle rack piece with keystone jack Right rack piece (no changes from…
Simple dual 4020 blower fan cooling duct for BIQU H2. Simple and low profile, it is height adjustable via the 2 mounting slots that connect directly to the H2. print gets fairly thin by the duct so .4mm nozzle or smaller would be best,…
This is my version on a Ubiquiti rack solution, it mounts a 3P USG with the Gen 2 Cloud Key with allowance for a network port on the front, and lastly a Raspberry Pi. Printed in 3 parts and slid together using a dovetail style connection…
A well-tested BIQU H2 Carriage, designed for the AM8/A8 and other similar printers. Many hours of printing already on my unit and it holds up perfectly. Great ABL, incredible fan performance, high-speed printing capabilities, and…
My UCG-Max seemed to be running quite warm on the bottom when sitting horizontally. I designed this vertical stand to improve airflow. The small gap between the bottom of the gateway and the stand is meant to accommodate a small piece of…
Biqu B1 in comparison to Ender 3 is printer with more rigid table, more powerfull mainboard, easy way to add BLTouch and in my opinion better possibility add second Z screw (there is free place on mainboard for additional stepper driver,…
Supported Hardware The following versions and probes are supported: 8mm: LJ8A3-2-Z/BX 12mm: LJ12A3-4-Z/BX 18mm: LJ18A3-8-Z/BX Offsets X: 2 Y: -33 In case you want to preconfigure Marlin using Configuration.h , you can use: #define…
This model is a tight-ish fit, if you want it to have a tiny bit of play on the device, you might want to increase the size by a few percent. printing oriantation: standing up on the backside (with the lips). Recommanded print settings: -…
Remixed in order to use my own ABL probe supports
Mod10 Rack Mount for Ubiquiti USW-Ultra A 10-inch rack mount for the Ubiquiti UniFi USW-Ultra, designed for use in the Mod10 mini server rack (or any standard 10-inch rack). This is a remix of @Mauker's design with improved tolerances,…
02.12.23 Rev2. Probe Mount Face raised 0.66mm. New remix version with E3D Revo CR hotend & BIQU microprobe in place of Bambulab hotend & CRtouch. Note: See original CRtouch version for remaining files. Ender 7 replacement toolhead with…
See https://www.printables.com/model/507270-harvestright-camera-mount for @dgardner_169337 excellent solution. I need a new bracket to fit the camera that I had. It needs 4 x M3 x 12mm bolts. Printed in PLA+ with 15% infill, can use other…
Mount should work for most of the H2 series. I am using with the H2 V2S. See https://github.com/jlas1/Klicky-Probe for details on the Klicky project. Will need to print a probe assembly. I am using Unklicky NG, but it should work with any…
Remix dimensions from the Biqu H2 Mount + Cover - Ender 3 CR10 by 3D_LC in Fusion360 and added TH3D Studio's Mini ABL
Adding klicky to my BLV mgn cube setup. I used 1.5 x 6 mm magnets for my klicky probe. 16T pulley for Voron Z-Endstop - customized height to fit my heatbed height HDMI break out :…
New remix version with BIQU microprobe in place of CRtouch. Note: See original CRtouch version for remaining files. There is also a E3D Revo CR remix version. Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh…
Mod10 Rack Mount for Ubiquiti USW-Flex-Mini 2.5Gbe This is a 10-inch rack mount for the Ubiquiti UniFi USW-Flex-Mini-2.5G-5, designed for use in the Mod10 mini server rack (or any standard 10-inch rack). This is a remix of @mauker's…
This mount comes from the left side flat mount for ABL sensors
Ubiquiti Cloud Gateway Fiber OEM Power Supply Wall Mount Keep your Ubiquiti Cloud Gateway Fiber power supply neatly mounted with this custom-designed wall bracket. Designed specifically for the original OEM power adapter included with the…
Frontal Biqu B1 support for attaching a Logitech c270 (and the like) camera mount system (https://www.printables.com/model/108598-cr10-ender-logitech-c920-c270-c310-c910-2020-camer). To be used with 2 square T-threads and regular allen M4…
Place on the extruder plate and secure with the tightening strap.
When you gaze too long into your 3D printer, your printer gazes back into you. Installation requires 2x M3x16 screws. Washers recommended. A color modifier is used for the eye pupil instead of painting to prevent color bleedthrough and…
I supose you could print these if that helps you mock up mounts. These dimension may not be perfect but are very close.
I mod Volcano horn cooling for Biqu H2 with Phaetus HF Heat block Category: 3D Printer Parts
Just pressing it in to the bar and enjoy your next print. <3 (There is a chamfer side for easier insert)
Just uploading the Scan of a Unifi Flex Mini - in case you need it to reverse engineer anything related to that. Scanned with Revopoint Pop 4.
A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
...made this Remix of Holspeed´s Filament Guide for the Biqu B1. I had to grind the radius a little bit... Print Settings Rafts: Doesn't Matter Supports: No **Resolution:** 0,2mm Infill: 20% Category: 3D Printer Parts
Simple spacer that raises the switch by 2cm. It leaves a horizontal cooling channel below. A fan placed on the side can cool both the Flex XG and the device below it. It's designed to rest inside the switch's wall mount cutouts and…
Part cooling duct for biqu h2 and biqu microprobe mount. Need 2x m3x3x3.5 heat set inserts for fixing the 5015 fan and 2x m3x3x3.5 heat set inserts for fixing the probe. Added v2 for less supports when printing. Apply some glue to…
I didn't want to mount my AP to the wall so I designed these simple legs/stands Just print 2 of them and screw them into the mounting bracket included in the box for the AP. You can use the M3 screws provided with the AP.
I am using this holder together with gopro ball adapter. Gopro system is used to connect raspberry pi zero system (octoprint) equipped with camera. Compatible ball joints with threads or gopro mount:…
I bought this belt tension gauge from BIQU to help me set the correct belt tension on my Voron printer. I wanted a nice box for it, so here it is. You will need to split it into several objects in your slicer, and if you like you can…
BIQU H2 Filament Cutter with BLTouch mount Requires: M2x4mm SHCS x 1 (or longer) M3x6mm SHCS x 4 M3x8mm SHCS x 1 M3x10mm SHCS x 4 ECAS bowden fitting x 1 (the one used on ERCF V2) #17 Blade x 1 Pen Spring x 1
Ikea Skadis mount for the Ubiquiti Switch Lite 8 PoE that uses the same geometry as the original Ubiquiti wall mount, but instead uses @ 6d6178 Skadis T-Nut system. This model uses 2x M2.5 T-Nuts which can be printed from here…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
Made mounts for my AC Pro and U7 Pro access points. No supports, print flat. For 10 inch rack plate I would suggest using solid infill to avoid twisting.
The original one was a bit short. Remixed it to make it have a bit of extra wiggle room. Cover images taken on iPhone 14 Made in Fusion 360
This is a fitted 10" rackmount for the Ubiquiti Unifi Express 7. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. The fit is fairly tight, but shouldn't be a problem. If…
Ce conduit de refroidissement personnalisé améliore le flux d’air autour de la buse pour la Comgrow T500 équipée de l’extrudeur Biqu H2 V2S . 👉 Le support intègre un positionnement optimisé pour le probe de nivellement automatique (type…
The recent release of the USW Pro XG 8 POE has a lot of people excited due to it's small form factor with 8 10G-BaseT POE++ ports and 2 SFP+ ports. However, the switch appears to run quite hot. Idle temperatures with minimal ports…
Choose your holding force. Houses up to three 20mm x 6mm x 2mm rectangular magnets so you can choose how firmly it grips the Core One steel frame . 1 magnet: quickest release 2 magnets: balanced between hold and one hand release 3…
An simple plate with hooks to hang an Ubiquiti POE injector to a Skadis pegboard ( https://www.ikea.com/be/en/p/skadis-pegboard-black-50534378/ ). The plate is fixed to the injector original mounting plate with 2 small screws (hard drive…
ENDER 5 (Pro) BIQU H2 V2S MOUNT v4.20 - - - NOT FINAL RELEASE - - - Modeled as a personal design challange. The model is designed with the intent to use all the original fastening points on the cartridge for stability. This model is…
Haven't seen any rack mounts for this model of switch, so I thought I'd make this myself. It's the switch flex, model name: USW-Flex (46W), that is able to take in a PoE++ and output 4x PoE. This model holds two of them side by side,…
Fits nicely but I haven't fully tested yet. Will update when I mount it. I printed it in solid abs but anything will likely work. Two M3x16 socket head screws. Biqu H2v2x is an underrated extruder that doesn't get the credit it deserves.
BIQU Panda Edge Scraper Holder - Magnetic & Mountable (Screw/Tape Options) Description: Upgrade your 3D printer setup with this functional and stylish holder for the popular BIQU Panda Edge scraper. This accessory is designed for easy and…
Had a spare BIQU Panda Revo and decided to put it to good use. This mod is only tested with it, but should also work with most of Bambu P1/X1 style hotends. The heater uses 10-12 more watts, but it worked for us. Usual warnings: we are…
This model is a 3D printable frame designed specifically for a 900 MHz biquad antenna . It provides accurate geometry and stable mechanical support for the antenna elements, ensuring consistent spacing and alignment, which is critical for…
This model is a 3D printable frame designed specifically for a 1800 MHz biquad antenna . It provides accurate geometry and stable mechanical support for the antenna elements, ensuring consistent spacing and alignment, which is critical…
Print on the backside, so the strenght of the holders is not compromised, with supports and brim. Not a perfect recreation in terms of visuals, but it works.
Mount your Ubiquity PS210 power supply on the wall. Three screw holes. Slides in no need to unmount to remove.
3D printable topographic miniature of Beira - 🇲🇿 Mozambique Capture the beauty of Beira 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates -19.832, 34.842 (LatLng) .…
Mount Arm for Ubiquiti NanoStation LocoM5 with a ±8° of tilt adjustment. The sleeve in this design is a loose fit over the arm. If mounting outdoors, this might need to be affixed with adhesive, or a screw. The sleeve allows about 10°…
The original didn't work for me. The screws I had with camera protruded past the back of the mount. I adjusted the depth of the bracket and moved the position of the screw holes. I used 3M command strips to mount my bracket, but I…
I used the GayPN's design as a guide to create a new model that fits my 3.15" vinyl siding corner. Like GayPN's design this is cut in half (you will need two of these) and uses M4 heat inserts for both the camera mount and to hold the…
Ever tried grabbing your BIQU CryoGrip Glacier Pro plate right after a print and immediately questioned your life choices? Yeah—same. This is a simple, sturdy handle designed specifically for the 235×235 BIQU CryoGrip Glacier Pro build…
I wanted to run a BIQU plate on my Q1 Pro as the blue plate QIDI provides is in my opinion not worth using - PETG sticks HARD to it and you can't lower the plate temp much and still get adhesion. It uses a 250x250 build plate and there…
Remixed to lengthen the bracket to fit both mounting holes on the POE-54V-80W from Ubiquiti. Printed using the following: Print on P1S using Bambu PETG HF (white) .3mm on .6mm nozzle, 4 walls, 25% gyroid infill No supports Settings are…
This is a heavy-duty, versatile mounting adapter for the Ubiquiti U7 Pro . It adapts the standard twist-lock mount to work with industrial or temporary setups, perfect for warehouses, temporary events, or labs. Mounting Options: Center…
3d printed Biqu B1 carriage that connects the pcb to the hot end assemble in 1 part.
With this model, the U7-LR can be easily placed on a cabinet, for example. I used white PETG from Jayo with 15% infill. I used 1.5x7mm screws for fastening.
Mounting plate for putting the Ubiquiti G4 Doorbell Pro (Wifi) and Angled Base Over a Gang Box Where I live (Germany) it's quite common to not only have a hole with a cable where your doorbell goes, we often have gang boxes…
Basically designed this to hang from a beam clamp via threaded rod. I am uploaded three versions, one with threaded inserts for the plate itself, one that just relies on the whiz nuts included with the AP (same design as Mauricio's) and…
This is a mount to hold the Ubiquiti Flex Mini 2.5G 5-Port Managed Network Switch to MultiBoard. This is fully print in place with no need for supports thanks to using my own design of snap anywhere connector.
Disclaimer : This is a model created by a colleague of mine. He allowed me to upload this model so others can use it aswell! Many thanks to him! This is a stand for the Ubiquiti U7 Pro-Wall. It was printed with ABS and fits very well. PLA…
Remixed the model by JustPrint. I added a 0.5mm inset honeycomb design to add grip.
This is a sleek case for the unifi travel router (UTR) by Unifi when combined with the INIU power bank. Its a sleek design that is minimalist but also highly practical. Toss it in your bag while traveling. Side vents to help with airflow…
I took the excellent starting model and decided to make it a little more robust, and increase the stability of the base after my access point kept deciding to bungee jump off its shelf (t he second time landing on my Core One and smashing…
Custom wall or rack mounting bracket for Ubiquiti UniFi Environmental Sensor. The bracket offers two mounting options: installation in a standard 19” rack or mounting with M3 screws. In both cases, the screw head height must not exceed 2…
Altered the original model to make the AP point downwards at 15 degree angle. Also altered the holes to use M3 heatset inserts. Printed in white PETG (Sunlu)
If using the H2 plate holder on a Naked Panda Station, you'll need this shim file:
A case for the Ubiquiti Unifi travel router with space for the included USB-c cable. I have included the fusion file so others can easily add or subtract from the model.
We needed a wall mount for some AirMAX LiteBeam 5ACs. Supports are required for the top portion. Printing the object with a 0.6mm nozzle is ideal, as the layer lines let the LiteBeam mount bite in nicely. A higher infill density is…
Printed with reality hyper PETG-CF 50 percent infill Tree supports for the lip only I would use at a minimum regular PETG or anything that has a good temperature resistance. I would avoid PLA variants due to potential warping
Ubiquiti Unifi G6 Entry Pro Spacers, included are from 45mm to 20mm. Recommend printing in PETG or ABS/ASA.
