Ubiquiti Doorbell G4 Pro (Wifi) mounting base plate for gang boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using this, you can put the angled base for the Ubiquiti G4 Doorbell Pro (Wifi) cleanly over a gang box
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Mounting plate for putting the Ubiquiti G4 Doorbell Pro (Wifi) and Angled Base Over a Gang Box
Where I live (Germany) it's quite common to not only have a hole with a cable where your doorbell goes, we often have gang boxes ("Unterputzdosen") in that spot. This makes mounting the G4 quite tricky for two reasons:
The bell simply isn't wide enough and won't cover a standard 60mm gang box completely.
The mounting screws are supposed to go directly above and below the cable outlet, which is where building code expects the actual cables to go. Mounting the doorbell according to the instructions will have you drill into these cables...
There are a few similar things on this site, but I wanted one that is compatible with the angled base and that goes on the right side of the door - for some reasons all I found here were mounts for the left side.
This model can easily be printed without any supports, just put it flat on the surface with the front side up. I printed my prototypes in PETG (works fine) and my final model with Prusament PC Blend Carbon, which looks really great. The pictures don't quite do it justice, really.
There are two models, one for bells on the left hand side of your door and one for the right hand side. I never actually printed the left side version, so please let me know if anything is wrong with that model and I'll look into it.
Assembly is easy. You will need two M4x16 bolts (countersunk), two M4 hex nuts and 4 screws for mounting the thing to your wall.
First put the hex nuts into the recesses on the back side of the plate, some mild force may be required for that. Now insert the angled base into the big recess on the front side - note that the cutout is slightly angled, just like the base, so it only goes in properly in one orientation. If it doesn't quite fit, you are doing it wrong.
The second step is to mount the plate to your wall using 4 bolts that go through the large holes in the base plate. If your walls aren't really flat, it is a really good idea to put some silicone arount the edges of the plate to keep moisture out.
Now use the M4x16 bolts to bolt the angled base to the plate. If you are paranoid, like me, you might want to put a bit of silicone around the edges to waterproof the assembly.
Now you can pull your wires through the cutout, mount the bell itself to the base and have fun with your new camera doorbell. :)
I really love to see how my models look in other people's setups, so I'd really appreciate you posting a make if you use this model.