Liczymy pasujące modele…
Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.6mm for single-color printers + AMS Model with no top loop. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it.…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
Converts the Kirin angled talon magwell (from Shellington Labs) to be single dart loading. In prep for a no-mag event, I found I didn't have any old-school blasters at the right FPS. There's a single load mag block for the SLAB and that…
Print per original model instructions. I recommend 3 walls with a 0.4mm nozzle for the frame.
Hello! Today, I am uploading some of the generically rendered transtibial prosthetic socket models I had made back in the day. These are produced and provided for EDUCATIONAL purposes only. They are NOT/NOT/NOT meant to be printed for…
Hello! I am uploading some generically rendered transfemoral prosthetic socket models I had made back in the day. These are (-yes,- a little low res and -I know- they could use a little clean up) produced and provided for EDUCATIONAL…
A super simple dishwasher sign that's print in place, and has multicolour using a single extruder Printer! I had a problem where there were many dishwasher signs, but they were too complicated, and needed multiple parts! so i designed my…
Measure device for AURAPOL 1kg filament spool single color Print from AURAPOL PLA. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the multicolor version!
Quick swap faceplates designed for the GEN2 Decor Drawers by Jerrari Print settings I used (included in 3MF) 0.4mm nozzle 0.2mm layer height 15% infill (gyroid) Seam position: Back (rotate faceplate so seams are on the underside of the…
This is a simple single piece case for an LM2596 DC - DC buck converter. There are several versions of this module but this case is specifically for the version pictured below. It has two mounting holes, a voltage adjustment…
For mounting behind walls, these holders are designed to securely support one or two 16mm flexible conduit tubes. Each slot includes an inner lip to ensure the conduit remains firmly in place. Including a drilling template for the dual…
A replacement hopper for the Smart Grinder Pro, I was unhappy with how small the opening and volume of the hopper was and I am not a fan of weights to prevent popcorning. It is sized to fit this bellows at 100% size…
Translated by Chat-GPT This is a simple and easy-to-print poker chip designed with a single color, so there’s no need to change colors during printing. Since it’s a single color, I used other methods to simulate the white Edge Spots…
Please excuse the bad saturation in the color layers in the example picture, I don't have orange filament :(
Pipe Clamps – Easy, Reliable, and Versatile! Designed for3D printers, these clamps are perfect for securing pipes with ease. Key Features: Single Clamps : Fit pipes from 10 to 75 mm. Double: Fit pipes from 15 to 40 mm. Triple Clamps : Fit…
This model turn a normal potentiometer into multi-turn potentiometer, because some time you want to make an enclosure for a board that come with trimpot, but adjusting trimpot is a pain and multi-turn potentiometers are expensive. Re-use…
The proper adapter for this would be a Metra 99-7325S (or Metra 99-7325B), though I wanted to place my Din lower to reduce windshield glare at night and to reduce reach for volume control. I also enlarged the open slot holder so you can…
I couldn’t find a choke tube holder that seemed practical for field use, so I designed this. These holders are made to fit 12-gauge shotgun choke tubes. The dual version has holes for attaching it to a lanyard or similar, and both…
Designed for the Apache 2800 case, for one Polk DB692 DB+ Series 6" x 9" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x8mm screws.…
The original model looked great when the other half saw it, and wanted some for the closet. After quickly realizing that our builder selection had only a single top support rod instead of 2, I closed off one in the slicer to test. Close…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the model to its parts and print each part separately Print all the pieces upright Use…
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
Design based along the lines of R2-D2, but for a single vent. Included is a rear backing ‘ring’ to help secure in place.
This design replaces the original Prusa Core One Wifi cover. In a single cover it combines the Wifi and the GPIO interface. ACCESSORIES This part is secured with the original M10 SHCS screw The GPIO card is secured with 4 x M3x6mm SHCS…
Required: 3x - M6x45 Cylinder Head ( legnth depending on your desk plate thickness ) 3x - M6 Wing screw or M6 Nuts 6mm Drill optional: 3x - M6 Washer !!!Print the adapter sideways or in a 45° angle for better stability!!! Filament Elegoo…
A VERY simple spreader … Basically, I was looking for a little piece of plastic that I could use to spread glue. Since it is covered in glue after use, I didn't want to bother with cleaning it and be able to trash it. So it had to be…
Updates: 2026-04-30 Added STEP file. Its gigantic because it has some of the original STLs in it also. 2025-05-10 updated v1.1 of Gearbox-part-1-2-Combined (with and without letters) enlarged hole for the intervalometer port to 5.6mm. The…
This stand can hold APX 6000's, APX 7000's, and APX 8000's. No supports or raft needed. Infill is 15%.
I make cute and exciting things 😊 Check out my cake toppers feel free to ask me to make a custom one of my current models 😊 my aim is to design easy and simple designs that don't take for ever to print single colour chase happy birthday…
Another two piece hook, made this to hang my backpack on. Will hold over 20lbs if printed in PETG, with a decent infil.
An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. Typical top extraction (i.e. between the milling machine and the foot, pulling the chips upwards) do not remove the spoil well when working with a…
ZC31S Suzuki Swift Sport Bumper Hole Filler This custom bumper hole filler is designed for the ZC31S Suzuki Swift Sport, specifically for vehicles running a single-exit exhaust in place of the original dual-exit setup. The model is based…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the Benjamin Marauder. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the…
https://youtu.be/s_dC-w5gyA0?si=XXUXzHBmlcngIpb- please do post pictures of makes and remixes i would love to see them and also please tell me if theres any modifications i should make for durability or handling. 2212 motor, 120 A esc, 9g…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the PP800. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
This is a strong and practical dual spool holder for 3D printing filament. It supports either two standard spools or one heavy 3kg spool . The center includes a removable spacer disc , allowing you to easily switch between dual spools or…
A simple, single‑piece filament spool holder—no assembly required! Securely holds standard 1 kg spools and includes an alternative version with built‑in holes for short PTFE‑tube (4mm in diameter) inserts to reduce friction—it's great if…
This is an adaptation to the design of One-Handed Joycon Controller Adapter (Right Hand version) by Richie Rein, which is also a remix of the Single hand Joy-Con adapter (Right) by Vexelius. Thanks to both of you for your work! For a…
Single-Left-Hand Joy-Con Adapter (+ Status Light, Wristband and Tactile Marking) This is an adaptation to the design of Single hand Joy-Con adapter (Left) by Vexelius, so, thanks for this! For a group project at university, we adapted the…
This a cheaper implementation of a single button module, similar to the Amazon Dash button, which were a convenient thing in the past, dedicated to a single product, and with the press of a button, you can order an item. Amazon stopped…
Remixed from UnimatrixReds Luke Skywalker grip disc files I always have bad luck when trying to print multiple models on my build plate at once. Something always goes wrong 80-90% of the way through the print then everything ruined. I…
This is a Nespresso Vertuo Coffee Dispenser rack. The original model was found at thttps://makerworld.com/en/models.
This a CP40 tool holder for LumenPnP/OpenPnP based on this work: https://github.com/richardklingler/openpnp/tree/master/openscad/toolchanger I've combined all the layers so that can be easily printed with a single material. Printed with…
Add some gorilla glue, insert it into the broken rod piece, and then wait for it to dry.
18 pin single sided edge connector, in my purpose was for the display driver board for Williams system 3-7 games.
wanted to use this model for a wall of bookshelf + hotwheels display for a kindergartener
Notice! This is only compatible with the AMS 2 PRO. Please view my other designs for designs supporting other AMS systems, there are plenty. Update August 5, 2026 Hydra has been updated to version 1.03. Changes: Optimized internal…
This is the Shaun the sheep model that I made in Bambu studio to get the multicolor on it.
Top hat for the micron + 180. Camera mounting, and handle holes.
Combines front_grill_left and front_grill_right into a single piece. There is also an option with a DSI cable passthrough for raspberry pi screens.
Six versions of hooks that slide on the top of aluminum semi-rounded glass shower end-tops. A set of three with wider top opening included. See extra pictures for dimension details. Recommend to print with higher infill (50%+) and more…
A simple remake of the great Skyrim Quest Mark by @Dmytro. I was inspired by the doorless design by @Solitaan_245699, but since his files did not include the single-piece file, I made it myself. Can be printed easily without supports with…
This is a follow on to my earlier Gridfinity holder for cleco pliers . I was a little disappointed that holder wouldn't fit one of my cleco pliers, but in order to get both sets of pliers to fit in 1x5 squares, there was no extra room to…
This thing replaces the front plate on a La Pavoni Jolly grinder to allow for directly collecting the grinds in a filter. It is in three parts, which might have to be modified individually. For example, the filter holder has a hole…
Single chamber meshed 600mL Becker size holding chamber for patch clamp experiment. Allow top and bottom perfusion of the sections for curing in bubbling artificial cerebrospinal fluid (during biocytin spread for example). Use 1mm cut…
This is a custom-designed Rocketbook corner featuring a single, larger 10×3 mm magnet for stronger attachment while keeping the footprint minimal. The magnet is placed in the center, allowing the corner to be used from both sides Features…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the Fx Impact. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
3D terrain for tabletop wargaming tends to be space hungry and difficult to store in bulk. I designed these hexes to be modular for building multi-level terrain structures while being more compact when stored or transported. These can be…
Trays for either (1) or (2) Samsung Remotes. The lower tray that holds (1) remote is designed to have a cavity for adding weight; rocks, sand, nuts/bolts, etc. Then you can glue it shut. My remote models are BN59-01480A (black) and…
🎄 Funny Personalizable Christmas Hitch Cover… With Balls! 🎅 ▶ Check the tutorial to put it together here. Bring some festive laughs to the road with this hilarious 3D printable trailer hitch cover! Designed for a 2x2 and 2.5x2.5 inch…
Single box organizer for OnMars board game, optimized for fast setup. Organizer consists of the following trays Player Tray X4 Base Game Resource trays Base Game Setup tray Building Tray Small Cards tray to sort out base game small cards…
Modelle um schöne Namensschilder für die Weihnachtsgeschenke zu erstellen. Zur Auswahl stehen eine Weihnachtsbaum, eine Weihnachtskugel oder ein Stern. Die Beschriftung selbst könnt Ihr ganz einfach im Prusa Slicer selbst machen und so…
1U Micro PC Rack Mount - Single/Dual Professional rack mounting solution for micro form factor PCs including Intel NUC, Dell OptiPlex Micro, HP EliteDesk Mini, and Lenovo ThinkCentre Tiny. Features: Standard 19" rack compatible Sliding…
I printed with PETG and recommend a high infill such as 80-90%+ as you don't want your gun to fall. Be very careful when screwing them in that you don't drill hard or they could break. I have a Ruger 10-22 on mine with a red dot and stock…
this page is still under construction :) More to come! Disclaimer: This model is limited by the strength of the 3D printed shaft (the "weakest link" in my testing). This is best for shredding small bits and pieces of paper or thin/brittle…
These adapters are designed to mount low-cost AliExpress aero/TT/Triathlon bars (round clamp type Riderace) onto a Hyyge Model S one-piece aero cockpit (same design as Kocevlo, as far as I know). Each side consists of 4 separate parts.…
Hexagonal DnD coaster (multicolor). There is a small gap at the bottom of the coaster for adding an optional name. 3mf file for multiextruder/multimaterial printer. Use the stl file for single extruder printers and change color (2 times…
As requested this is a single shot sled version of my Lee Enfield Magazine. I have yet to test it at a range but using dummy rounds it will cycle perfectly. You have to press the magazine release when loading the magazine for the most…
I printed in PETG. A 0.2MM layer height leaves the top fairly rough, but it seems to feed well. I printed the sample in the picture with 15% infill and just 2 wall layers as a test. I'm planning to do another in 35-50% and 4 layers once I…
Two of these interlock in a satisfying manner. Alternatively can be used as a focus tool or nerve stim. Print Settings: 50-100% infill (the heavier the better) brim if your printer is prone to knocking things over
I really enjoyed rbid's remix and with Valentine's Day coming up I wanted to add a heart decoration to the model. This is my first remix so I hope I am doing it appropriately and with justice! If you have a single color printer and are…
Simple scalloped-edge drying rack coaster for your favorite mug. Wash and put it down, all ready for tomorrow! I added rubber feet on the bottom for slipping.
the other single mini bit remix had bad threads, i fixed it and also rounded off the edges to make it look a bit nicer
Needed a bachelor version of Joe's model. Slimmed it down and added a flat bottom for stability. Also added drain holes.
available as a clip on or with the magnet. Mine was a nice press fit in, but you can glue it if needed. Added a hole to help pop it out without destructing it! Props to 荣yan for giving me a starting point, but I changed almost every…
A little valentine sign to give to someone you love. Design by @cris_k_b here at MKRSHIFT Assemble with a strand of filament in the hinge. https://www.tiktok.com/@mkrshift/video/7599430362669894934
This is a small and simple hook designed for 3D printing. Overall dimensions: 25 × 15 × 6 mm . The hook is mounted using one screw . The mounting hole diameter is 3 mm , suitable for standard self-tapping screws. Designed for quick…
These banners are based on a design by GWGumby , but decorated, and improved for multi-color printing. The most noticeable changes are the thinner banner, and the border around the banner. You can choose to print the border in a different…
VIDEO The model contains one printed part plus a optional cap and a few parts for mounting. There are 11 variants (0 to 10) with different pad stiffness. We recommend printing the medium stiffness marked with the number 5 first and trying…
This is a simple modification to the original OEM Elegoo Centauri Carbon "CC MINI" model. The original "CC MINI" model is available from Elegoos website and from the USB stick that comes with the printer. It comes with two 3mm screw…
Single PCBite insert designed to securely hold the PCBite cable within the Rugged Multipart case during storage and transport.
This single watch stand display is designed for a clean, minimal presentation and is ready to print with no supports required (print it laid on its left side) The stand features a 0.75 mm recessed watch support area, allowing you to add…
