Gridfinity 5x5 Baseplate Stack, Single Material Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5x5 baseplate printed in a stack 4 high. Modeled line supports allow for easy separation.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 305
- Wydruki
- 0
- Wyświetlenia
- 1389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Didn't like any of the print in place Gridfinity baseplates as they didn't seem single material friendly. I modeled in single line supports to get a good blend of adherence and still being able to separate. Modeled a solid tower in each corner to help with corners lifting/warping. Cut towers off post print then separate layers. sometimes a utility blade helps to get it started. Included step files in the attachments for anyone who wants to add more layers to the stack. I printed this on my Prusa Core One (210x250 plate) with .25mm layer height in Bambu generic PLA, 215C. DO NOT RUN SUPPORTS! Support lines are modeled for .25mm layer height so .28mm would make them disappear in the slicer. .25mm and under should work fine.