Gridfinity 5x5 Baseplate Stack, Single Material Compatible
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.11 – €7.46 net (excluding VAT)
For file: grid stack assem 4 v3_0.4n_0.25mm_PLA_COREONE_3h57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.78 excluding VAT (range midpoint).
- Weight reported by the author
- 144 g
- Print time reported by the author
- 3.95 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
5x5 baseplate printed in a stack 4 high. Modeled line supports allow for easy separation.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 305
- Makes
- 0
- Views
- 1,389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Didn't like any of the print in place Gridfinity baseplates as they didn't seem single material friendly. I modeled in single line supports to get a good blend of adherence and still being able to separate. Modeled a solid tower in each corner to help with corners lifting/warping. Cut towers off post print then separate layers. sometimes a utility blade helps to get it started. Included step files in the attachments for anyone who wants to add more layers to the stack. I printed this on my Prusa Core One (210x250 plate) with .25mm layer height in Bambu generic PLA, 215C. DO NOT RUN SUPPORTS! Support lines are modeled for .25mm layer height so .28mm would make them disappear in the slicer. .25mm and under should work fine.