Liczymy pasujące modele…
Support my work +++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++…
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
3D model based on the dimensional drawings and images publicly available online. For reference and design purposes only. You can measure the step file or use it to design fan ducts, mounts etcetera! Note; this model is not publicised or…
This remix exists purely because I enjoy putting way to much detail into a model. Hopefully this helps someone intelligently design some amazing fixturing for this toolhead. Enjoy!
To adapt our BIQU Hurakan to use H2 V2S REVO we need to adapt BIQU MicroProbe sensor using this universal BIQU MicroProbe for all H2 extruders series. Klipper configuration changes: [probe] ... x_offset: 4 y_offset: -32 ... [safe_z_home]…
I present a complete set of quick assembly of the Biqu H2V2s extruder. The kit includes the EBB42 adapter, a complete fan duct using the 5015 fan (modified design of @MarcoZ76_408) and a quick assembly tool (modified design of crazy…
Simple BLTouch/3DTouch/MicroProbe mount for your BIQU H2 V2S lite extruder. Assembly: Just use two washers between the fan and the mount (as seen in pictures) BL/3D Touch Offset: x: -32 y: +2 MicroProbe Offset: x: -29 y: +2 Printed…
I designed and simulated this air duct to be mounted on the front of the BIQU H2 V2s Lite. There are 4 versions: 1: 5015 blower fan / no BL-Touch 2: 5015 blower fan / with BL-Touch mount 3: 5020 blower fan / no BL-Touch 4: 5020 blower fan…
A compact mounting solution for a dual 5015 fan with clear nozzle view, and use of the original metal BL Touch bracket. I found the Pudgy fan duct and really liked the look of it but found that it could be improved in some areas. Part of…
slightly MAD is my version of MAD system for BIQU H2. Updates: 26.02.26: - Added the "Slightly_MAD_Mounting_Plate_MAD_Ender_3V2_universal" that should be compatible with different revisions of the X-Carriage bracket on Ender 3 V2 -…
The Pudgy is a t h i c c dual-5015 part cooling duct for the BIQU H2 V2S. GitHub Repository : https://github.com/skybldev/pudgy-part-cooling-duct Main Features Large opening and duct for high airflow* Open access to the exposed gear and…
…Please be sure to hit like & post a make, I'd love to see your prints! The Vortex Viper fully height adjustable cooling system for the H2 V2S LITE extruder. Make sure your printer is set up well, there are very tight tolerances & tiny…
You will find the whole project to be able to mount the BIQU H2 V2S REVO on an X2 artillery. The assembly allows to put a BL_Touch (either a TOUCH_MI, or a BL touch) The assembly is planned for a 5015 blower. For the attachment on the…
After scouring the web i couldnt find a mount specific to my needs so I ran off to design it on my own, Designed 100% in Tinkercad by me. Printed in PLA+ and ZERO supports needed This mount will allow you to mount a Microprobe on the…
BIQU H2 print head is one of our favorite extruders for its great performance, being very compact and lightweight, which makes it perfect for machines like the BIQU Hurakan. In our case we have opted for the BIQU H2 V2S Revo version.…
A mounting bracket to put a Biqu H2 V2S Lite on a Voron X-Carriage-Frame. Only compatible with the old (CW1) X-Frame, since the screws go in from the rear. The extruder is 2mm offset from the x-carriage, so that it clears the right…
Part cooling fan for biqu h2 v2s that have bigger air outlets. Use 2x heat set inserts to mount the fan.
To adapt our BIQU Hurakan to use H2 V2S REVO we need to adapt SuperPinda/Pinda 8mm sensor for all H2 extruders series. Klipper configuration changes: [probe] ... x_offset: 5 # Original 0.0 y_offset: -17.8 # Original -30 ... [safe_z_home]…
It is an remix of user h19x51 model because with the original i had some little issues on my Genius Pro: too little space on the right side where the belt is connected to the base plate too little space on the lower left side where the…
The default bowden setup and extruder really limits how well you can print on Biqu Hurakan so I've decided to upgrade to a direct extruder, H2S Lite from Biqu . This mod was inspired by JJR3D mods but I've recreated and redesigned…
This is a mount for the new Biqu H2 V2S Lite with a back side duct and a 4020 blower. Specifically made for the Ender 3 but should fit most similar Creality printers including CR-10 series. The mount is just a slightly modified stock H2…
Remixed to make the mounting slightly adjustable in height. One version that still is for countersunk screws. One version made for hex screws.
Other required hardware 3x M3 heatset inserts Print settings Layer height - 0.2 Wall line count - 4 Infill - 25% Support - No Material - PETG
Introducing: I didn’t find a single mount for the BIQU H2 V2S extruder for my Ender 3 S1, so I decided to make my own. I liked the solution for the Sprite Extruder using one cable for connection and a quick-removable design, so I decided…
Biqu H2 V2S Lite Extruder Mockup
Modified the original backing plate by FHOGPHIL to include mounting for the OEM filament runout sensor from a CR10 V2 or V3. Modified the BTT supplied fan duct to work in conjunction with a new BL Touch mount and also allow access to the…
I don't like the original cable routing on the model by IBI because the cables can move and break on the connector after some time, so I made this. This part has three functions: Make the connection between base plate and V2S more rigid…
Remixed the model from Sumerlin_Designing to better line up with the V2S Lite due to the longer nozzle/heat block. I added a little more than 10mm along the Z axis and relocated the mounting holes to accommodate for the difference. Print…
Supported Hardware The following versions and probes are supported: 8mm: LJ8A3-2-Z/BX 12mm: LJ12A3-4-Z/BX 18mm: LJ18A3-8-Z/BX Offsets X: 2 Y: -33 In case you want to preconfigure Marlin using Configuration.h , you can use: #define…
Anycubic Kobra/Vyper (fist generation) Biqu H2 V2S Revo mount. This is designed to slide onto the existing manufacturer hot end mount, and be secured using the existing mounting holes and hardware (screws). It's overdue for a revision,…
BIQU - H2 V2S - Fan Ducts Printhead & Part-Cooler May fit other Makes / Models (H2 / Lite) Revision 1 By: David Orlo Part Details Dual 5020 Blower Fans: Single shared duct that splits into Two Independent Printhead Ducts Expected…
This is a mount I made in order to bring the components of my system closer together, making it more compact and a cleaner look overall. I even needed a place to put my eddy probe, so i designed a simple bracket for it. Been printing with…
You don need additional mounting hardware, the screws provided with new extruder are enough but you will need to shorten the ones for the front fan mount (or use shorter ones) With this you gain a little more bed space(309mm in x, 308mm…
Complete extruder mount for attaching H2 V2S extruder to Tronxy X5SA. The base bracket attaches directly to the default gantry plate with clearance for screw heads and the x-axis endstop. It also has a side arm for holding a BL Touch.…
This is a redesign of the model to take into account the BiQu MicroProbe. You will find the whole project to be able to mount the BIQU H2 V2S REVO on an X2 artillery. The assembly is planned for a 5015 blower. For the attachment on the…
This mount retains all the stock endstop locations and reuses the Tronxy Z sensor. This results in no loss of build volume and the only firmware that needs to be changed is the max hotend temp. This still uses the Re-tweeked Claw duct…
An adjustable mount for the MAD mod compatible with regular h2v2, E3D volcano upgrade, V2S Lite and Revo. x_offset: 36.5 y_offset:-38 Z has a 9.5mm position adjustment There are versions: 03_MAD__BLTOUCH_VOLCANO_WITH_GROOVE Is identical…
Modification of my pervious design to add support for the Revo and BL Touch. When using with the standard V2 , mount the BL Touch above the bracket. For the Revo, it may be necessary to mount it below the bracket to account for the longer…
Edit: 16/09/24: I removed the heated inserts version as it was too high. The newest version allows for up and down movement with an extra part to set the height at 2.5 I needed a mount for the BTT Eddy v1. Couldn't find one as BTT haven't…
Good day all! I've created this mount which whould allow you to mount a Biqu H2 V2S Lite to an Ender 3 Pro Extruder Mount. It offer both a 40mm Fan mount to replace the 35mm fan which hopefully adds some rigidity, and a 12mm NPN Probe…
…Please be sure to hit like & post a make, I'd love to see your prints! Mount Fysetc Portable Input Shaper USB C Accelerometer on Biqu H2V2 & H2V2S extruders. We have two mountings solutions for the X axis here. An end motor mount that…
Modified the original to fit my 3DFused linear rail X carriage. Works like a charm for my BIQU H2 V2S Revo. Fusion360 project files are included for both V1 and V2 X carriage plates. Print Settings Printer Brand: Creality Printer: Ender 3…
This is a redesign of the model to take into account the BiQu MicroProbe. You will find the whole project to be able to mount the BIQU H2 V2S REVO on an X2 artillery. The assembly is planned for a 5015 blower. For the attachment on the…
X5SA Pro BIQU H2 v2s Lite mounting plate you will need 3 m3*h3 heat inserts and 2 m3x12 countersunk screws to mount this, works best with the fan mount, duct and bltouch mounts from here: https://www.thingiverse.com/thing:5202213 use the…
Microprobe support for the Biqu H2V2S Revo.
Linear rail mount for the h2 (should work with both types) ive only tried H2V2S The adxl is attached with 3mm brass inserts Enjoy
it fits on a 2040 extrusion with a MGN9H linear rail on top and the timing belt below. it has a flange that i used to screw on some sort of toolhead board as my printer uses flatcables. it has an integrated mount for a 4010 fan but i…
A CR-Touch Mount for the BIQU H2 V2S. Just screws into the existing tapped holes of the BIQU H2 V2S. It uses two M3 4mm OD x 5mm heat set inserts to mount the CR Touch I just have it tested on my V2S so Im not sure on wich Variants of the…
Ich habe einen Halter für eine Biqu MicroProbe V2 entworfen. Versatz in X ist -36 und in Y 0. Der Halter ist passend für einen Biqu V2S Revo Extruder. Sie benötigen 2 M2,5x8 Schrauben und 2 M2,5 Mutter um die Sonde am Halter zu finden.
Topology optimized BIQU H2 V2S lite mount for maximum stiffness and minimum weight to crank up the accelerations! Lightweight designed original fan electronic board mounts. The H2 mount and the fan mount prints may need some supports. No…
this mount was made for the h2v2s but should fit h2v2 and h2v2s lite aswell i also have a btt ebb42 mount for this if you decide to use canbus, it will be in my printables profile…
Holds Beacon3d's RevH eddy current surface scanner ~2.5mm above the plate. DOESN'T WORK WITH GLASS BEDS.
5015 Fan, adxl345, Biqu Micro Probe V2 mount for the H2 V2S Regular or H2 V2S Revo The probe should have a 7mm offset to the right (X+7) 24mm in front (Y-24) and the Z offset should be about 0.5mm depending on nozzle selection. Regular…
I had a BQ H2V2S lying around and wanted to put it to good use on my new Kingroon KP3S Pro, so I remixed this mount for the S variant of the hot end/extruder combo. EDIT: A second version of this mount has been added which allows the…
Version 1 of this model moved the air vents down 3mm. When I test printed it, I thought that the vents were too low so in version 2 of this model I have moved the air vents back up by half a millimeter. I printed this with supports only…
I came up with a better design and am using that one now, check it out! https://www.printables.com/model/830061-h2-v2s-mount-for-tronxy-x5sa I couldn't find a decent mount to attach the BIQU to my Tronxy X5SA (non pro) that was compatible…
A brass threaded insert must be inserted for the X stop. The X-axis motor travel must be changed Layer : 0.2 Supports : no Filler : 15%< Perimeters : 5 Nozzle : 0.4
Built for a modified Creality Ender 5 Plus with Biqu H2 V2S Extruder to integrate with a BTT SFS2.0 smart filament sensor. Printed in ABS-CF for stiffness/temp resistance (running in a heated chamber). Some holes may need to be tapped M3…
I ordered the Biqu H2V2s Lite, but I struggled to find a suitable mount for my Ender 3V2. Most mounts available online were designed for the H2V2s, not the Lite version. Additionally, the few models compatible with the Lite mount…
This model is untested because I'm waiting on something to finish my build. It should work for most of the BIQU H2 family of products and the fanduct can be used for any project (check dimensions). The fan duct is more compact than most…
I printed this with 3 wall loops, 3 layers top and bottom, 15% infill PLA works fine, however the bottom bracket might deform if used without a hotend sock. Youll need 6x M2x8 hex socket screws & 6x M2 nuts for assembly, 4x M3x8 hex…
Adjustments made: Increased the holes in the middle to make them fit on the v1 X-axis plate Don't forget to also print the “ H2 FanMount V4.stl ” from the original model by @PJR_208037
bigtreetech ebb42 mount to pair with my biqu h2v2s extruder mount https://www.printables.com/model/924433-biqu-h2v2s-mount-kobra-max-vyper-kobra-plus
Plate for CR touch and stok stuff.
5015 fan mount for the BIQU H2 V2s Lite. This also includes microprobe mount with 0mm X and 20mm Y offset. For a bill of material and links to products used to make this check here: http://www.perpetualprinter.com/
The H2 V2S needs a part cooling fan. This device scavenges the air coming from the heatsink fan and then routes it down to the halo around the hot end nozzle. No extra fans needed! No excess weight! Keeps the hot end center balance! I…
Print this part with supports on the inductive probe ring.
This is my take on a toolhead for the Duender. It uses an H2 V2S Revo extruder from Biqu and takes inspiration from the EVA 3 system for wrapping the assembly around the gantry and placing the part cooling fan on the back. This toolhead…
Fix the mounting bracket to the h2v2s lite with 2 M3x6mm screws: it's made to work with my quick change bracket: https://www.printables.com/model/889441-artillery-sidewinder-x1x2geniuspro-quick-change-br you can also fit it to the…
5015 fanduct to suit biqu h2, h2v2s hotend extruders, has mounting point for probe or bltouch
This is to attach the H2V2S mount to the MAD fan system.
This is an X-axis mounting plate for Biqu H2 V2S Revo with a MGN12H mount, an Eddy duo probe and ADXL345 for input shaping. There is also a chain connector to be used with this type of chain:…
Ender 3 Pro H2 V2S Revo Mount. Print flat on your build plate! The latest version allows for you to use the bolts for the wheels on the X carriage. You may need to add longer bolts if you secure the adapter to the stock hot end plate. You…
Touch mount for the Creality CR-Touch / BL-Touch auto-leveling kit on the BIQU H2V2S Lite. NOZZLE_TO_PROBE_OFFSET values = X -42, Y -0, Z -2.6 The XYZ offset may vary slightly depending on the touch screen and should therefore be checked.…
Ficher crée pas Z.Rogers Filament PETG - ABS - ASA Tuto: https://lizati3d.com/remplacer-la-tete-dextrusion-de-la-comgrow-t500-par-le-biqu-h2-v2s printer.cfg
6mm Blue (https://vi.aliexpress.com/item/1005004826050398.html) 4x M3 bolts
I suggest printing this with PETG You will need M3x4 Embedded nuts
ENDER 5 (Pro) BIQU H2 V2S MOUNT v4.20 - - - NOT FINAL RELEASE - - - Modeled as a personal design challange. The model is designed with the intent to use all the original fastening points on the cartridge for stability. This model is…
Print with 4 walls to make it as solid as possible. Can be printed with PLA
look at my other uploads for fan mounts and ebb42 mounts if needed
I liked JJR3D's probe holder for the H2 V2S revo as it was the closest one to the nozzle out of all the others I had seen but it was for a microprobe so I had to adapt it for my ender 3 sensor. This fits a 12mm probe and when fitted it is…
Ce conduit de refroidissement personnalisé améliore le flux d’air autour de la buse pour la Comgrow T500 équipée de l’extrudeur Biqu H2 V2S . 👉 Le support intègre un positionnement optimisé pour le probe de nivellement automatique (type…
Just a rework of some parts, to get more mounting tolerance. You will need the parts from the original design, replace some of them, to get also the H2 V2S Extruder to work.
I remix the designs are for user easily to change to use another Extruder kit on their Elegoo Neptune 4 Series or maybe Neptune 3 Series N4Plus-QTC-Base My Print Settings Infill: 30%-35% Layer Height: 0.2mm Perimeter: 4 Top/Bottom Layer:…
remix i use for ender 6 with biqu h2 and bl touch relocated for batter clearances
The Ender 3 NG v1.2 toolhead currently does not support the Biqu H2 V2S Revo hotend. I created this using Orca Slicer to install one. I am sharing it because I haven't found anyone else with a solution for this Ender 3 mod. I created it…
I redesign & remix again to ditch Elegoo Toolboard and use BTT EBB42 Toolboard. Version 1 files can refer to this link: https://www.printables.com/model/936634-neptune4plus-quicktoolchanger-h2v2s-remix-v1 Step 1 Please print out:…
FreakyDude has made an excellent mount and fan duct(s) for use on the Artillery X1/X2/Genius/Pro and with the BIQU H2 Extruder using the (original) Volcano heatblock and nozzles. For my Genius Pro, I just made some minor tweaks to his "H2…
This model allows one to mount their Biqu H2 V2s REVO extruder to their Sovol SV03 or SV01 machine. Due to the different length of the extrusion path, I am unsure if this model works for the non REVO version of this extruder. If anyone…
OMG V2S Direct Drive Extruder for Sapphire Plus
remixed the MP3DP core support for the H2V2s for i3 adaptation and can use the same fan and sensor mounts
These models are remixes of the fine work by @freakyDude to adapt the BTT H2V2s extruder to the Artillery SW2. In this case my first printer is the Artillery Genius Pro and though it is very similar to the SW2 it is not identical. On top…
Quando si cambia moto ma si vuole tenere lo strumento di navigazione che già si utilizzava. Ho stampato i pezzi in ABS perchè la moto è soggetta a sbalzi climatici improvvisi, probabilmente può bastare anche il PTEG
original PCB mounts have been added
A simple mount for BTT Eddy on the Biqu H2V2s Offset: x_offset: 6.935 y_offset: -26.970 Printed in PETG and works
Ce conduit de refroidissement personnalisé améliore le flux d’air autour de la buse pour la Comgrow T500 équipée de l’extrudeur Biqu H2 V2S . 👉 Le support intègre un positionnement optimisé pour le probe de nivellement automatique (type…
