Biqu H2V2S Microprobe Fan Grille mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the original metal gaurd on the H2V2S to be used as a mounting point for the Biqu Microprobe (v1 and V2)
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 168
- Wydruki
- 0
- Wyświetlenia
- 612
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After scouring the web i couldnt find a mount specific to my needs so I ran off to design it on my own, Designed 100% in Tinkercad by me.
Printed in PLA+ and ZERO supports needed
This mount will allow you to mount a Microprobe on the front of a Biqu H2V2s direct drive hotend in place of the stock metal fan grille, while still allowing clearance for larger dual flow fans like the official Biqu H2 part cooling setup!
Nozzle to probe offset is
x=-40 y=0,
your Z offset may vary slightly, one of my machines using this mount is around -0.34 while the other is at -0.67 I think this is due to small tolerance differences in the probes, as well as the printer you print the file on.