1 / 3
slightly MAD air duct mount for BIQU H2 V2S + Ender 3 V2 plate — zdjęcie 1
1 / 3

slightly MAD air duct mount for BIQU H2 V2S + Ender 3 V2 plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

More minimalistic version of MAD system for BIQU H2 for Ender 3 V2

Ocena
4,667 / 5
Polubienia
67
Pobrania
302
Wydruki
3
Wyświetlenia
3199
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

slightly MAD is my version of MAD system for BIQU H2.

Updates:

  • 26.02.26:
    - Added the "Slightly_MAD_Mounting_Plate_MAD_Ender_3V2_universal" that should be compatible with different revisions of the X-Carriage bracket on Ender 3 V2
    - Renamed the mounting plate from "Slightly_MAD_Mounting_Plate_MAD_Ender_3V2_NEW" to just "Slightly_MAD_Mounting_Plate_MAD_Ender_3V2"

  • 21.03.24:
    -Changed the mounting plate design to fit a fan spacer. It makes the hotend much more rigid and reduces vibrations a lot. Fan spacer has two options: for stock 35mm and for 40mm one.
    Added STEP Files. 

  • 27.09.23:
    - Added ‘Slightly_MAD_Fan_Pin_normal.STL’ and ‘Slightly_MAD_Fan_Pin_Loose.STL’ as i somehow managed to forget them during initial upload. The “loose” version can be used if the normal one is too tight.

  • 23.06.23:
    - ‘Slightly_MAD_Double_5015_Mount.STL’ replaced because the chamfers were somehow lost during export 😅

My goal was to create a clean looking air duct / mounting system with as many wires hidden as possible. For better looks the stepper motor should be rotated 90° to hide the wires behind.

The air duct mounting plate is compatible with original air ducts found here: MAD - Modular Air Duct for BIQU H2 / H2 V2S REVO / H2 V2S Lite / & E3D VOLCANO mod

Parts needed for air duct mount:

  • M3x6 screws x12

  • M3 nuts x4

  • M3 heat inserts x2

Parts needed for mounting on the plate:

  • M3x8 screws x2 (BIQU H2 → mounting plate)

  • M3x8 screw x1 (mounting plate → printer X-bracket, lower left hole)

  • M3x12 screw with 1x M3 nut (mounting plate → printer X-bracket, upper hole)

After assembly and before putting on cable clamp, all the wires can be clamped inside of the wire outlet with a narrow zip tie.

Assembly guide: 

 


 

Tagi